Dynamic Cone Penetrometer

0View Cart

Construction Materials Testing Equipment

Shop By Category

Question

Name:

Company:

Email:

Phone:

State: Location:

NEED HELP? Call Sales at: 1.800.544.7220 or

Home > Store > Soil-Field > Compaction/Consistency > Dynamic Cone Penetrometer

Soil-Field

Dynamic Cone Penetrometer

Click to Enlarge

Heavy-Duty Dynamic Cone Penetrometer

The Heavy Duty DCP permits rapid and economical evaluation of soils while providing information on soil stratification. The DCP is commonly used for footing evaluations and can also be used to evaluate fill when compaction must be verified. This tool consists of a sliding hammer assembly with a 10-pound hammer that is dropped 24 inches. The slide hammer shaft is machined from one piece of alloy steel. Both the hammer shaft and hammer are heat treated to ensure long life. This device uses a 36" Extension Shaft that is .875" diameter, with 6" increments marked along its length. There is a 60-degree, hardened-cone tip that is 1.125" diameter. Having a larger diameter cone than the diameter of the shaft helps reduce side friction along the length of the extension shaft. Extension shafts may be attached end-to-end to achieve a depth of 9 feet. This set consists of: (1) Slide Hammer Assembly; (1) 36" Lower Extension Shaft With Hardened Cone Tip;(1) 36" Lower Extension Shaft With Threaded End for 72" Depth of Test; (1) Heavy duty Pelican carry case with custom inserts. The set also includes all necessary tools for easy assembly and disassembly and a complete User and Maintenance Manual. We strongly advise hand augering a hole first when going beyond 6 feet. Refer to ASTM Special Publication No. 399 for insight into DCP use and practices

$1,620.00 Add to Order

Heavy-Duty Dynamic Cone Penetrometer— H-4223

Accessories / Replacement Parts

$1,020.00 Add to Order

Sliding drive hammer assembly— H-4223.1

$220.00 Add to Order

Extension Shaft, 36 inches— H-4223.2

PRICE ON REQUEST
1.800.544.7220

Extension Shaft, 24 inches— H-4223.4

$55.00 Add to Order

Cone Tip, 60°— H-4223.3

Dynamic Cone Penetrometer Test Set

For use in nearly all types of soils. The H-4202A set for 10 ft. includes; one standard hammer assembly (H-4202A.1), one heat treated 45° cone penetrometer point with 1 ft. adapter rod (H-4202.3), four 2.5 ft. E drill rod extensions (H-4202.225), one auger head (H-4202.6), one auger T-handle (H-4202.4), and four 36" auger extensions (H-4202.5). Shipping wt. 76 lbs. (36kg)

$667.00 Add to Order

Dynamic Cone Penetrometer Test Set— H-4202A

$805.50 Add to Order

Sleeved Hammer DCP Test Set (with sleeved drive hammer)— H-4202AS

$534.00 Add to Order

DCP Test Set w/o Auger Set— H-4202AX

$641.50 Add to Order

Sleeved Hammer DCP Test set w/o Auger Set— H-4202SX

Accessories / Replacement Parts

$216.50 Add to Order

Standard drive hammer— H-4202.1

$69.60 Add to Order