Construction Materials Testing Equipment
Shop By Category
Click to Enlarge
The resistivity meter can be easily used to measure resistivity of soil in-situ using the 2, 3, or 4 electrode method or with the soil box to measure resistivity of soil or water in the range of distilled to sea water. It has a wide range (0.01 ohm to 1.1 megohm) in 8 ranges with 10% overlap. It is fully temperature stabilized over temperature ranges encountered in all field conditions; is insensitive to A.C. or D.C. ground currents; can be used safely in wet ground and comes with (1) 12-volt lantern battery and shoulder carrying strap. Shipping wt. 11 lbs (5kg)
$1,620.00 Add to Order
Resistivity Meter— H-4385
Click to Enlarge
The Digital Resistivity Meter provides soil resistivity readings at the push of a button. It provides a direct read-out of resistance without a need to select ranges or adjust dials. The resistance range is from 0.01Ω to 10MΩ (auto-ranging). The meter provides a high-resolution digital display and is housed in a rugged, hard plastic case— safe for use on wet ground. It provides a Bluetooth interface for optional data logging via a Bluetooth-enabled PC. Resistance measurements are unaffected by any stray interference signals, which may be present in the soil during readings, due to the use of narrow band-pass filters centered at 82.2Hz (the unit's operating frequency). Runs on a set of replaceable D-cell alkaline batteries with no need to periodically recharge the unit or to plug it into a power source. Performs 10,000 single readings on a fresh set of batteries. For data logging capabilities, the meter is supplied with an "over-the pipe" soil resistivity survey program, known as "ProCP Soil Resistivity", based on the 4-Pin Wenner Methodology. Complies with ASTM G187. Shipping wt. 11 lbs (5kg)
$1,943.00 Add to Order
Digital Resistivity Meter— H-4385D