Construction Materials Testing Equipment
Shop By Category
Construction Materials Testing Equipment
Shop By Category
Click to Enlarge
Soil Box, 8.75 x 1.5 x 1.25" (222 x 38 x 32), 280ml capacity. The soil box is used with the H-4385 resistivity meter for a quick and accurate measurement of resistivity of a soil or water sample in the field or laboratory. Construction is clear plastic with stainless steel current plates and brass potential pins. The dimensions are such that the measured resistivity with the H-4385, when the box is filled level, can be expressed in ohm-centimeter, making calculations unnecessary. The box can also be used with other meters.
$148.00 Add to Order
Soil Box, 280ml capacity— H-4386
Click to Enlarge
Small Soil Box, 4.375 x 1.125 x 1.5" (111 x 29 x 38), 75ml capacity. The soil box is used with the H-4385 resistivity meter for a quick and accurate measurement of resistivity of a soil or water sample in the field or laboratory. Construction is clear plastic with stainless steel current plates and brass potential pins. The dimensions are such that the measured resistivity with the H-4385, when the box is filled level, can be expressed in ohm-centimeter, making calculations unnecessary. The box can also be used with other meters.
$140.00 Add to Order
Soil Box, Small, 75ml capacity— H-4386SM
Click to Enlarge
Soil Box Leads, set of 4, for use with H-4385 Resistivity Meter.
$56.25 Add to Order
Soil Box Leads— H-4387
Click to Enlarge
Four pin, test reel set for attaining 1-20 ft. depth measurements. For use with H-4385 Resistivity Meter, as well as any 4-terminal meter. Uses 4-electrode Wenner method. Includes 4 separate, color-coded wires of varying lengths from 5 to 65 ft. Jumper leads (2-foot) are supplied for connection to meter.
$306.00 Add to Order
Resistivity Test Reel with Soil Pins— H-4388
Click to Enlarge
Set of four.
PRICE ON REQUEST
1.800.544.7220
Soil Pins (Electrodes)— H-4388.1
Click to Enlarge
The Soil Cylinder can be used to satisfy either of the 2-electrode methods— ASTM G187 or AASHTO T-288 Standards. The body of the Soil Cylinder is made of Plexiglas (allowing easy viewing of sample) with PVC components and the distribution plates (conducting end plates) are stainless steel. Rubber O-rings provide sealing for the two end caps. Accommodates large sample volumes [approximately 2,714 cm3 (2.714 liters) and can accommodate crushed-rock samples, as well as regular soils and liquids. Water can be added in-situ for sample saturation (de-ionized water, simulated rain water etc.) Provides closed, air-tight volume— field-collected samples can be immediately "installed" in the cylinder, as opposed to filling a separate container for transportation. This means that resistance readings taken at a later stage will be representative of the "as-found" condition of the sample.
$291.00 Add to Order
Soil Cylinder— H-4385.5
site map | terms and conditions of sale | privacy policy
©2012 Humboldt Mfg. Co. | Site development and hosting by Belniak Media, Inc.
