Construction Materials Testing Equipment
Shop By Category
Construction Materials Testing Equipment
Shop By Category
Click to Enlarge
Master Humidifier Unit is recommended for humidifying comparatively large areas, evaporating a maximum of 5 lbs. (approximately 6/10 gal) of water per hour. Reservoir is copper; unit includes adjustable brass water float for operation on variable water pressures up to 75 lbs. (334N). Sealed to protect it from water, motor section drives both disc and pump tube to produce vapor without heat. Overall dimensions: 14-1/2" dia. x 10-1/2" height
$1,550.00 Add to Order
Master Humidifier— H-2914
Click to Enlarge
Humidistat Controller measures moisture in air of room or space in which it is installed. Automatically controls H-2914 Master Humidifier to achieve desired indoor relative humidity.
$85.00 Add to Order
Humidistat Controller— H-2915
Click to Enlarge
Designed specifically for small spaces that need a dependable unit in environments up to 100% RH (relative humidity). Well suited for areas between 16 to 30 feet in length, (and can be used in smaller areas down to 12 foot) this model has a maximum fogging output of 5 GPH and can propel fog up to 20 feet. The H-2734 utilizes a two-blade fan, making it about 30% quieter than larger units. The nozzle-free fans can atomize ordinary water supplies into a very fine mist-like fog. Utilizing high-speed centrifugal force and powerful air flow, these units can propel a misty-fog stream up to 20 feet away.
The powerful H-2734 is engineered to withstand humid conditions as high as 100% RH and above, and corrosive environments containing salts, lime, ammonia and other acidic compounds. Units are constructed of impenetrable components like Nema 4 connections, all 304 SST hardware, UV stabilized polyethylene plastics, PVC dip-coated steel, and sulfuric anodized aluminum. Standard configuration includes a 1/2 HP Baldor wash-down-duty motor that is specifically designed for wet, corrosive environments, 115/230V, 1ph, 60Hz.
Included with unit is an: adjustable-angle hanging bracket; visual flowmeter panel with strainer, 12 ft. SJO indoor/outdoor, heavy-duty power cord; 20 ft. Poly-Flo water line tubing; 16 ft. water drainage line; 100% stainless steel hardware, and easy-to-follow operator's manual.
$1,330.00 Add to Order
Fogging Fan— H-2734
Click to Enlarge
Similar to the H-2734 Fan above, but utilizes a 1/3 HP Baldor wash-down-duty motor that is specifically designed for wet, corrosive environments, 120/240V, 1ph, 50Hz
$950.00 Add to Order
Fogging Fan— H-2735.5F
Click to Enlarge
The H-2737 Bench-Type Fogging Fan is a quiet and dependable fogging fan, perfectly suited for the small curing rooms. The H-2737 conveniently sits on flat surfaces or shelves and is extremely easy to set up and operate. The nozzle-free fan can atomize ordinary water supplies into a very fine mist-like-fog, as well as well or pond water without the risk of clogging. Utilizing high-speed centrifugal force and air flow, these units can propel a misty-fog stream up to 20 feet away. The H-2737 is engineered to withstand humid conditions as high as 100% relative humidity. Units are constructed of impenetrable components like Nema 4 boxes and connections, all 304 stainless steel hardware, UV stabilized polyethylene housing and precision, high strength injection molded polypropylene components. Units also reuse their condensation waste water, eliminating the need of a near by drain. Bench Top units fill automatically by means of an internal float valve and come equipped with a simple garden hose connection. A quarter-turn valve controls the fogging output.
Specifications
• Fogging Capacity: 0-3 Gallons per hour
• CFM Rating: 1,215 Cubic feet per minute
• Energy Consumption: 1.5 Amps @ 115V
• Noise @ 10 ft.: 62 dB(A)
• Weight: 10.5 lbs
• Dimensions: 16" in Diameter x 16" in length
• Voltage: 110-128 Volts, 60Hz, 1ph
• Coverage: About 500 sq. ft.
$598.50 Add to Order
Fine Mist, Fogging Fan (Bench-Type)— H-2737
Click to Enlarge
Similar to the H-2737, the H-2738 is a direct-feed, hanging unit, which receives liquid directly through a visual flowmeter control panel. This provides for fine "repeatable" control of the fogging output, as well as enhancing dependability by eliminating sump components. Direct Feed units are well suited for harsher environments or applications where standing water in a sump could become an issue. Each unit is equipped with a 5 GPH (20-300cc/min) flowmeter panel and 12' condensation drainage line.
Specifications
• Fogging Capacity: 0-3 Gallons per hour
• CFM Rating: 1,215 Cubic feet per minute
• Energy Consumption: 1.5 Amps @ 115V
• Noise @ 10 ft.: 62 dB(A)
• Weight: 10.5 lbs
• Dimensions: 16" in Diameter x 16" in length
• Voltage: 110-128 Volts, 60Hz, 1ph
• Coverage: About 500 sq. ft.
$524.00 Add to Order
Fine Mist, Fogging Fan (Hanging-Type)— H-2738
site map | terms and conditions of sale | privacy policy
©2012 Humboldt Mfg. Co. | Site development and hosting by Belniak Media, Inc.
