Home > Products > Concrete > Strength > Test Hammers
The New Proceq Silver Schmidt Test Hammer has been redesigned to provide unmatched accuracy, repeatability and easy, intuitive operation. The Silver Schmidt features quicker and more accurate testing while addressing the previous insufficiencies of the traditional hammers. With the Silver Schmidt impact direction no longer has an impact on values; values are not affected by internal friction of the hammer operation, and, loss of accuracy because of seal problems is not affected.
In use, the Silver Schmidt eliminates cocking the hammer for each blow and recording the results, the Silver Schmidt allows you to do all your test blows in rapid succession, while it records the results. These results can then be reviewed. Intuitive User Interface is language independent through the use of easy-to-understand icons. The interface menu structure is similar to a mobile phone's. Practically every command can be activated either directly or via no more than 2 consecutive steps.
All data is automatically saved and may be reviewed via the data list. The memory capacity is dependent of the length of tests in a series, but roughly 400 series with 10 readings each can be accomplished with the Silver Schmidt. The Silver Schmidt hammer includes these standard accessories: battery charger with USB cable, data carrier with software, carrying strap, grinding stone, chalk, documentation and carrying bag. Software provided for performing firmware upgrades and selecting presets only.
$1,650.00 Add to Order
Silver Schmidt Test Hammer, Standard Version, Type N– H-2971ST
Same as H-2971ST, but includes Hammerlink software.
SilverSchmidt UN (Impact energy 2,207 Nm) – consisting of: SilverSchmidt UN, Hammerlink software, standard accessories including USB kit (USB cable, USB-stick and USB charger global), carrying strap, grinding stone, chalk, user manual, quick reference guide, certificate, impact templates and carrying case
$2,090.00 Add to Order
SilverSchmidt Concrete Test Hammer with Hammerlink Software– H-2971U
Non-destructive strength testing of concrete has a whole new look thanks to the new SilverSchmidt Test Hammer. The new SilverSchmidt redefines concrete strength testing with the use of what is called a "Q" value as opposed to the classic use of an "R" value. What this means for you is that the new SilverSchmidt provides a more accurate method of measuring impact and rebound, which eliminates the need for referencing a chart, based on orientation, to determine the strength of concrete. The new SilverSchmidt calculates the test results for you and provides the concrete strength in any of the many user-defined measurement modes.
The Silver Schmidt provides an easy-to-use graphical, icon interface that provides the operator complete control of the test parameters and results display. Review of test data can be performed for the last 20 measurements.
SilverSchmidt BN (Impact energy 2,207 Nm) - consisting of: SilverSchmidt BN with standard accessories including USB kit (USB cable and USB charger global), carrying strap, grinding stone, chalk, user manual, quick reference guide, certificate and carrying case.
$1,450.00 Add to Order
SilverSchmidt Concrete Test Hammer– H-2971B
Mushroom Plunger use with H-2971B and H-2971U Silver Schmidt hammers. For testing soft materials i.e. young concrete
$470.00 Add to Order
Mushroom Plunger for Silver Schmidt– H-2971B.1
Click to Enlarge
The H-2975, Type N Hammer is designed for testing concrete items 4" (100mm) or more in thickness, or concrete with a maximum particle size less than or equal to 1.25" (32mm).It is designed for testing concrete within a compressive strength range of 1,450 to 10,150 psi (10 to 70 N/mm[sup]2[/sup]) and Impact energy of the test is 1.6 ft-lbs (2.207 Nm) The standard (Type N) hammer displays rebound values on a mechanical sliding scale. These values can then be correlated to compressive strength by using the conversion table chart affixed to the hammer.
$729.00 Add to Order
Type N Schmidt Hammer– H-2975
Same as above, but includes a conversion table with a N/mm2 scale instead of psi.
$729.00 Add to Order
Type N Schmidt Hammer (N/mm2)– H-2975M
Click to Enlarge
The H-2975NR hammer utilizes the same hammer mechanism as the H-2975, but includes an integral paper strip recorder, which provides rebound values as a bar chart on a paper strip, providing a hardcopy record of the test data. One roll of paper can document 4,000 test impacts.
$1,490.00 Add to Order
Type NR Schmidt Hammer– H-2975NR
Click to Enlarge
The H-2975L hammer is designed for testing thin-walled structural components with a thickness of less than 4" (100mm) or rock cores. This hammer features an impact of 0.74 Nm, 1/3 less energy than the Type N hammers.
$1,050.00 Add to Order
Type L Schmidt Hammer– H-2975L
Same as above, but includes a conversion table with a N/mm[sup]2[/sup] scale instead of psi.
$1,163.00 Add to Order
Type L Schmidt Hammer (N/mm2)– H-2975LM
Click to Enlarge
The Digi-Schmidt Concrete Test Hammer couples the original Schmidt Hammer with rebound measuring sensors and microprocessor technology to provide an instrument designed applications requiring numerous measurements. The method is rapid, reproducible, and has resolution previously unattainable by manual models.
The hammer is connected to a control and display unit by means of a connecting cable. Strength values are shown digitally as they are taken and also displayed as groups of bars on the 128 x 128 pixel graphic LCD. Mean value and standard deviation for a preset number of measurements are computed and displayed. Via a menu display, the user can select hammer impact direction (up, down, horizontal, etc.) and desired engineering units (psi, MPa, kg/cm2, or N/mm2) and indicates the specimen size and type (cylinders, cubes, etc.) for which strength data are to be predicted.
Instrument measuring range is 1,450 to 10,150 psi (10-70 N/mm2) using 2.207 Nm impact energy. Accuracy is ±0.2R with 0.5R reproducibility. Rebound vs. strength correlation curves for 7 and 28 day strengths are installed in memory, or the users own data may be installed via keyboard entry. The Internal memory holds 5000 measurements, each with date and time. Data can be transferred via the RS-232C interface to a PC in Microsoft Excel using the included cable and software. Direct printing is possible.
The Digi-Schmidt consists of the test hammer, control and display unit, connecting cable, PC cable, carrying strap, rubbing stone, instruction manual and a plastic carrying case. Meets ASTM C805.
$2,580.00 Add to Order
Digi-Schmidt Concrete Test Hammer– H-2976
site map | terms and conditions of sale | privacy policy
©2010 Humboldt Mfg. Co.
