Home > Products > Concrete > Moisture, Cured Slabs > Vapor Emission Test Kits
For determining moisture levels in concrete slabs and floors, Humboldt carries a complete line of Relative Humidity/Moisture Meters and Vapor Emission Test Kits. In addition to the standard non-invasive meters used for moisture determination, we now carry a new series of meters, which utilize the RH BluePeg System and comply with the ASTM standard F2170-02. These meters utilize a small sensor, which is placed into drilled holes in a concrete slab. Once in place, the meter can be plugged into the sensor and readings taken. The sensor is reusable and can be moved between holes, if desired. This method also allows for long-term monitoring of a floor as well.
We also stock vapor emission test kits in both 3 and 12-pak configurations. These kits meet the ASTM E1907 standard.
Click to Enlarge
Vapor Emission Test Kit, 12-Pak (10,000 sq. ft.) The vapor emission test is used for determining the moisture acceptability for the placement of floor coverings and coatings over concrete slab surfaces. Using this method, users can easily quantify the volume of water vapor emitting from a 1,000 square foot concrete slab over a 24-hour period. Commonly known as the Anhydrous Calcium Chloride Vapor Emission Method, the test is directly specified by the vast majority of the Floor Covering Industry as the primary measure of moisture acceptability for floor covering or coating installations. The kit consists of a calcium chloride container, a specifically designed dome cover with seal and step-by-step instructions. A balance or scale readable to 0.1 grams is required, but must be purchased separately. Meets ASTM E1907 and F1869 specifications.
$138.00 Add to Order
Vapor Emission Test Kit, 3-Pak (1,000 sq. ft.)
$36.00 Add to Order
site map | terms and conditions of sale | privacy policy
©2010 Humboldt Mfg. Co.
