Home > Products > Concrete > Non-Destructive Testing > Strength > Ultrasonic
Click to Enlarge
You can use the TICO to determine cracks, honey-combs, voids, delaminations in concrete as well as frozen concrete and other non homogenous conditions that occur in concrete. The unit also allows you to determine modulus of elasticity and concrete strength.
The TICO uses 2 Transducers to send ultrasonic sound waves through the concrete. The unit allows you to test in 3 different modes, Direct, Semi-Direct, and Indirect. A wide range of transducers allows the user to meet the demands of almost any test site. Ultrasonic testing is often used in conjunction with the Schmidt hammer to pin point specific weak areas. All information is displayed on a large easy to read screen. Data can be saved for downloading to a PC for analysis and evaluation.
The unit comes equipped with two 54khz transducers, two 5ft (1.5m) BNC cables, calibration bar, coupling agent, carrying case and easy to follow instruction manual. Conforms to ASTM C597, BS1881-203
Range approx. 15 to 6550 µs
Resolution 0.1 µs
Voltage Pulse 1 kV
Pulse Rate 3/s
Impedance 1M
Transducers 54 kHz with 5ft. (1.5m) BNC cables, two included
Memory Nonvolatile, up to 250 measured values
Display 128 x 128 pixel graphic LCD
Data Output RS-232C interface
Temp. Range -10° to +60°C
Battery 30 hours with six AA (LR 6) batteries (1.5V)
Dimensions 12.8" x 11.6" x 4.15" (325 x 295 x 105 mm)
Weight Shpg. 12 lbs. (5.4 kg)
$3,790.00 Add to Order
Click to Enlarge
The Pundit Plus is the new generation, pulse velocity test system that features the latest in microprocessor technology for today's increasing demands for accuracy, reliability and ease of operation. For added convenience, the new system incorporates a transducer-mounted switch for ease in recording of readings and built-in memory to store up to 100 readings.
A standard RS-232C port allows the user to download the stored information using HyperTerminal for exporting into compatible spreadsheet applications. Menu-driven options permit the user to display transit time, velocity, limits or elastic modulus in either English or Metric units. The complete kit includes the instrument in a nylon holder, AC power supply and power cord, two 54 kHz transducers, two 12 ft. (3.7m) cables, coupling agent and operating manual. Meets ASTM C597, AASHTO TP37 and BS1881-203.
Velocity 1 to 9999 ft/s or m/s at an accuracy of ±1 ft/s or m/s
Transit Time 1 to 9999 m/s at an accuracy of ±1 m/s.
Elastic Modulus up to 999.9 GN/m2 at an accuracy of ±0.1 GN/m2
Resolution 0.1 us
Voltage Pulse 1 kV
Pulse Rate 3/s
Transducers 54 kHz with 12ft. (3.6m) BNC cables, two included
Display 128 x 128 pixel graphic LCD
Data Output RS-232C interface
Temp. Range 0° to +40°C
Battery 8 Internal rechargeable NiMH batteries
Dimensions 9.8" x 6.3" x 3.9" (250 x 160 x 100 mm)
Weight Shpg. 12 lbs. (5.4 kg)
$4,450.00 Add to Order
Click to Enlarge
The V-Meter™ is an advanced ultrasonic, pulse-velocity test system widely used for quality control and evaluation of concrete structures. It can identify non-homogeneous conditions such as voids, cracks, honeycombs and frozen concrete. The V-Meter comes with standard 54khz transducers, and its large easy-to-read display is perfect for field use. The battery will last up to 10 hrs. on a single charge, and the unit is capable of storing over 1800 readings for later processing. Conforms to ASTM C597, BS1881-203 and other international standards.
Frequency Range 24-500 KHz, based on transducers selected
Sensitivity 250 micro volts, between 30 KHz and 100 KHz
Input impedance approximately 2 M OHMS
Transit Time 0.1 to 6400 microseconds, direct digital display
Accuracy + 0.1 microseconds
Pulse Rate selectable 1, 3 or 10
Transmitter output pulse 1000/500V, 2 microseconds
Display 240 x 64 pixel graphic LCD
Storage 1 K byte
Data Transfer RS-232C w/handheld option.
Temp. Range 0° to +40°C
Battery NI-CAD batteries, 9 hours operation.
Dimensions 7.5" x 4" x 8" 190 x 100 x 220mm
Weight 6 lbs. (2.7 kg) w/ battery
$3,680.00 Add to Order