For U.S. Orders & Quotes
hmc@humboldtmfg.com
1.800.544.7220 or fax: 1.708.456.0137

International Orders & Quotes
hmc@humboldtmfg.com
1.708.456.6300 or fax: 1.708.456.5412

Cement

Accessories

Flow Cone Stand— H-2833

Flow Cone Stand— H-2833

Sturdy well-constructed steel stand to support flow cones so the top is level and the cone free from vibration. Overall dimensions: 21"W x 9-1?2"D x 23"H. Shipping wt. 17 lbs. (7.7kg)

Flow Cone Stand— H-2833

$84.00 Add to Order

6-Liter, Stainless Steel Beaker— H-2834SSB

6-Liter, Stainless Steel Beaker— H-2834SSB

6-Liter, Stainless Steel Beaker for use with Flow Cone Sets

6-Liter, Stainless Steel Beaker— H-2834SSB

$24.00 Add to Order

Grout Box— H-2838

Grout Box— H-2838

Cardboard box designed to be used to mold grout test samples. Each box forms 4 molds and can be used as a transport/shipping container as well. Boxes yield consistent, identical prism samples, while the engineered, slotted corrugation retains moisture while closely simulating CMU absorption rates. 25 boxes to a package.

Grout Box— H-2838

$146.00 Add to Order

Micrometer Bridge Set— H-2903

Micrometer Bridge Set— H-2903

Designed to hold one cylinder to permit repeated volume change measurements without moving or disturbing the specimen. Includes the following items: H-2901 Micrometer Bridge, H-2902 Micrometer Depth Gauge, H-2904 Tapered Cylinder Mold, H-2905.2 Tamping Rod, H-2905.2 glass plate and H-2905.3 Weight.

Micrometer Bridge Set— H-2903

$490.00 Add to Order

Tapered Cylinder Mold— H-2904

Tapered Cylinder Mold— H-2904

Used to determine volume change of grout, mold is constructed of steel tubing 1/4" wall x 3" dia. x 6"H (6 x 76 x 152mm). Mold is split longitudinally with two quick-acting clamps welded to the mold. Top edge of mold is machine tapered to a narrow rim. Includes detachable base plate. Meets ASTM C1090. Shipping wt. 6 lbs. (2.7kg)

Tapered Cylinder Mold— H-2904

$96.00 Add to Order

Micrometer Depth Gauge— H-2902

Micrometer Depth Gauge— H-2902

Graduations in the thousandths of an inch (.001"), range 0 to 3", 1/8" rod dia. Sleeve is designed with staggered lines, hardened and precision ground screw; lock nut holds the setting at the precise measurement. Includes protective case. Base length is 2-1/2".

Micrometer Depth Gauge— H-2902

$196.00 Add to Order

Micrometer Bridge— H-2901

Micrometer Bridge— H-2901

Bridge is used to hold the H-2904 mold in place while repeated volume change measurements are made.

Micrometer Bridge— H-2901

$198.00 Add to Order

Tamping Rod— H-2905.1

Tamping Rod— H-2905.1

Round, straight steel rod is 3/8" (10mm) dia. x 12" (300mm) long. Both ends are rounded to a hemispherical tip of the same diameter as the rod. Meets ASTM C157, C192.

Tamping Rod— H-2905.1

$10.00 Add to Order

Glass Plate— H-2905.2

Glass Plate— H-2905.2

Glass plate used with Micrometer Bridge Setup

Glass Plate— H-2905.2

$9.00 Add to Order

Weight— H-2905.3

Weight— H-2905.3

3 lb weight for use with Micrometer Bridge Setup

Weight— H-2905.3

FOR BEST PRICING Call 1.800.544.7220