Marshall Testing Compression Accessories

For U.S. Orders & Quotes
hmc@humboldtmfg.com
1.800.544.7220 or fax: 1.708.456.0137

International Orders & Quotes
hmc@humboldtmfg.com
1.708.456.6300 or fax: 1.708.456.5412

Store > Asphalt > Marshall > Compression Accessories

Cart | Items: 0

Asphalt

Marshall
- Heavy Duty Compactors
- HD Compactor Hammers
- HD Compactor Accessories
- Standard Duty Compactors
- SD Compactor Hammers
- SD Compactor Accessories
- Molds
- Accessories
- Sample Ejector
- Hand Compactors
- Compression Machines
- Test Set
- Compression Accessories
- Load Rings
- Water Baths
Mix Testing
- Mixers
- QuarterMaster
- Permeameters
- Furnace
Rice Test
- Pycnometers
- Accessories
- De-Airing Table
- Vacuum Pumps
SHRP Equipment
- Gyratory Compactor
- Revolving Shelf Oven
- Bending Beam Rheometer
- Vacuum Degassing Oven
- Pressure Aging Vessel
Saybolt Viscometer
- Viscometer Bath
- Components
- Accessories
Viscosity
- Bath
- Vacuum Regulators
- Ford Cup
- Float Test
- Cloud and Pour
Viscometer
- Seitfuchs
- Asphalt Institute
Spot Test
Softening Point
- Apparatus
- Components
- Thermometers
Ductility
- Machines
- Molds
- Force Determination
- Accessories
Grease
- Consistency
Sample Containers
- Moisture Boxes
- Tin Sample Cups
- Transfer Dish
- Bacon Bomb Sampler
- ASTM Oil Sampler
Penetration
- Penetrometers
- Needles
Distillation
- Cut-Back
  - Components
- Emulsified
  - Components
- Dean-Stark
  - Components
- Volatile Distallates
- Moisture Distallates
- Accessories
- Distillation Traps
Particle Charge
- Meter
Solubility
- Test Set
- Replacment Parts
Cleveland Flash
- Tester
- Replacement Parts
Tag Flash
- Tester
- Components
Carbon Residue
- Conradson
Centrifuge
- Extractors
- Filter Rings
- Replacment Parts
- Value Extractors
- Hand-driven
- Filter Paper
Vacuum Extraction
- Extractor
- Replacement Parts
Reflux Extraction
- Sets
- Components
Dispensers

Compression Accessories

4" Marshall Breaking Head— H-1342

Marshall Breaking Heads consist of an upper and lower cylindrical segment having an inside radius of curvature of 2" for a 4" sample. The lower segment is mounted on a base with two perpendicular guide rods extending vertically from the base. One guide rod is larger than the other, with a correspondingly larger guide sleeve in the upper segment to ensure correct assembly. Guide sleeves in the upper segment bring the two sections together without appreciable binding or loose motion on the guide rods. Meet ASTM D6927.
H-1342 shipping wt. 20 lbs. (9.1kg).

4" Marshall Breaking Head— H-1342

$366.00 Add to Order

6" Marshall Breaking Head— H-1362

Marshall Breaking Heads consist of an upper and lower cylindrical segment having an inside radius of curvature of 3" for a 6" sample. The lower segment is mounted on a base with two perpendicular guide rods extending vertically from the base. One guide rod is larger than the other, with a correspondingly larger guide sleeve in the upper segment to ensure correct assembly. Guide sleeves in the upper segment bring the two sections together without appreciable binding or loose motion on the guide rods. Meet ASTM D6927.
H-1362 shipping wt. 30 lbs. (13.65kg)

6" Marshall Breaking Head— H-1362

$510.00 Add to Order

4" Lottman Breaking Head— H-1349

Breaking heads for testing tensile strength. H-1349 has 1/2" wide upper and lower
segments for use on 4" samples. Meet ASTM D6931, AASHTO T283. Shipping wt. 10 lbs.

4" Lottman Breaking Head— H-1349

$320.00 Add to Order

6" Lottman Breaking Head— H-1369

Breaking heads for testing tensile strength. H-1369 has 3/4" wide upper and lower segments for use on 6" samples. Meet ASTM D6931, AASHTO T283. Shipping wt. 10 lbs.

6" Lottman Breaking Head— H-1369

$440.00 Add to Order

Dial Flowmeter— H-1344

Consists of a special dial indicator with a maximum position brake assembly and a guide sleeve that ?ts over either guide rod of a H-1342 or H-1362 stability test mold. H-1344 has a range of 1.00" with 0.01" divisions.

Dial Flowmeter— H-1344

$200.00 Add to Order

Dial Flowmeter, metric— H-1344M

Consists of a special dial indicator with a maximum position brake assembly and a guide sleeve that ?ts over either guide rod of a H-1342 or H-1362 stability test mold. H-1344M has a range 25mm with 0.25mm divisions.

Dial Flowmeter, metric— H-1344M

$218.00 Add to Order