Construction Materials Testing Equipment
Shop By Category
Click to Enlarge
Direct-drive two-stage rotary sliding vane high vacuum pump features gas ballast and trap to reduce risk of oil being sucked into the system. Produces free air displacement 85L per minute (3 cu. ft. per minute) and maximum vacuum 29-30". Operating temperature is 30 to 170°F
$740.00 Add to Order
High Vacuum Pump, 115V 60Hz— H-1763A
Click to Enlarge
Designed for continuous use, this two-stage, belt-driven pump operates on the oil-sealed rotary vane principle and is ideal for distillation, filtration, degassing and as a roughing pump for high-vacuum systems. Pumps are mounted on rectangular steel base plate and include V-belt and belt guard that totally encloses belt and pulleys. Pump pulls 29-30" maximum vacuum. Includes initial supply of oil plus an extra quart of HyVac® oil. Shipping wt.
$1,250.00 Add to Order
Two-Stage Vacuum Pump, 115V 60Hz— H-1764
Click to Enlarge
High-vacuum, small capacity, general-purpose vacuum pump with belt guard has two-stage construction for efficiency with low maintenance. Features metal vanes and vented exhaust for introduction of air to remove condensable vapors. Pump is filled with oil; an extra quart is included. Exhaust filter is available separately. Guaranteed ultimate vacuum is 25-29" (635-736mm) mercury, and free-air displacement is 25L/min. (0.9cfm).
$1,710.00 Add to Order
Vacuum Pump— H-1770
Click to Enlarge
Split-capacitor four-pole, two-stage oil-less diaphragm vacuum pump pulls 29" Hg maximum-obtainable vacuum. Shipping wt.
$676.00 Add to Order
Two-Stage Oil-less Vacuum Pump, 115V 60Hz— H-1762
Click to Enlarge
Vacuum Pump Oil for use with pumps above.
$36.00 Add to Order
Vacuum Pump Oil, 1 Gallon— H-1766.3
Click to Enlarge
Purges contaminants and condensables, such as water & solvents from all mechanical vacuum pumps. Use between oil changes minimizes contamination of new oil by residue from old oil; extends pump life. Shipping wt.
$29.40 Add to Order
Flushing Oil for Vacuum Pumps— H-1768.3