Humboldt Manufacturing

0View Cart

Construction Materials Testing Equipment

 

Shop By Category

NEED HELP? Call Sales at: 1.800.544.7220 or

Asphalt

Asphalt Permeameters for Permeability Testing

Asphalt Permeameter Click to Enlarge

Asphalt Permeameter

These asphalt permeameters are compact, self-contained, easy-to-use units, which can be used in the lab or in the field. They are used to test the permeability of a compacted asphalt paving mixture by using the falling head method to determine hydraulic conductivity of saturated 4" or 6" samples. To use, place the specimen inside the metal cylinder, where it is held in place by a latex. The unit is then pressurized by the built in hand pump. The expanding membrane pushes against the outer edge of the sample, filling in voids and preventing flow down the side of the core. The sample is then saturated from the bottom, and 500cc of water is allowed to flow through the sample while being timed. Include a 500cc manometer with 15 ft of 1/4" OD water line, built-in hand pump and a pressure gauge.

Manual: HM-9110_HM-9111.pdf

$895.00 Add to Order

Asphalt Permeameter, 4"— HM-9110

$890.00 Add to Order

Asphalt Permeameter, 6"— HM-9111

$42.00 Add to Order

4" Membranes for use with HM-9110 Asphalt Permeameter— HM-9110.2

$74.00 Add to Order

6" Membranes for use with HM-9111 Asphalt Permeameter— HM-9111.2

$8.00 Add to Order

4" O-rings for use with HM-9110 Asphalt Permeameter— HM-9110.1

Asphalt Permeameter

Asphalt Permeameter

$42.00 Add to Order

4" Membranes for use with HM-9110 Asphalt Permeameter— HM-9110.2

$74.00 Add to Order

6" Membranes for use with HM-9111 Asphalt Permeameter— HM-9111.2

Asphalt Permeameter, 6" O-rings

Asphalt Permeameter, 6" O-rings

$9.00 Add to Order

Asphalt Permeameter, 6" O-rings— HM-9111.1

NCAT Field Permeameter Click to Enlarge

NCAT Field Permeameter

The NCAT Field Permeameter is a falling-head permeameter using Darcy's Law to determine rate of water flow through asphalt pavement. This design was selected by the National Center for Asphalt Technology (NCAT) for its close correlation with laboratory test results. Testing and subsequent calculations can usually be completed in 10-15 minutes by one technician.

The HM-9113 Permeameter is supplied in two sections and constructed of rugged plastic. In use, sealing material is placed on the base plate and the unit seated against the pavement using gentle foot pressure and included base weights. After filling with water, outflow is observed using the clearly marked graduations. The smallest, uppermost tier allows rapid determinations in low-porosity pavements. The larger diameter tiers are used to accurately read flow on more porous pavements. Alternate top section HM-9113 replaces the two top tiers with one larger diameter tier. This allows for extended test times on moderately permeable mats or for rapid filling when testing highly permeable mixes.

$674.00 Add to Order

NCAT Field Permeameter— HM-9113

site map | terms and conditions of sale | privacy policy
©2012 Humboldt Mfg. Co. | Site development and hosting by Belniak Media, Inc.

SSL Certificate ISO-9001-2010