< Previouswww.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 5 46 CONCRETE Rebound Test Hammers H-2975 H-2994, H-2992 H-2987H Concrete Rebound Hammers Concrete rebound hammers are used to determine in-place strength of concrete. All these models accurately measure compressive strength, which directly determines the load-bearing capacity and durability of concrete structures. All models also include a grinding stone, carrying case and instruction booklet with conversion charts. Humboldt Rebound Hammer ASTM C805; BS 1881: Part 202; ISOIDIS8045; ENV 206; IGJ/T 23-2001 Humboldt’s concrete rebound hammer provides a reliable, yet economical, alternative to the original Schmidt hammer. It is designed for testing concrete 4" (100mm) or more in thickness with a maximum particle size less than or equal to 1.25" (32mm), providing a quick and simple test for obtaining an immediate indication of concrete strength in var- ious parts of a structure. The Humboldt rebound hammer covers a compressive strength range of 1,450 to 9,000 psi (10 to 62 MPa). To operate, the rebound hammer is pressed against the concrete structure and the rebound values are displayed on a mechanical sliding scale. These values can then be correlated to compressive strength by using the conversion table chart affixed to the hammer. It includes a grinding stone, a cloth carrying case, instruction booklet and conversion charts. Humboldt Test Hammer, Type N H-2987H Ship wt. 4lbs. (1.8kg) Schmidt Hammer, Type N ASTM C805; BS 1881: Part 202; ISOIDIS8045; ENV 206; IGJ/T 23-2001 The original Schmidt ® hammer, type N, is designed for non-destructive testing of concrete items 4" (100mm) or more in thickness, or concrete with a maximum particle size less than or equal to 1.25" (32mm). It is designed for testing concrete within a compressive strength range of 1,450 to 10,152 psi (10 to 70 N/mm 2 ) and impact energy of the test is 1.6 ft-lbs (2.207 Nm). The (type N) Schmidt ® ham- mer is pressed against the concrete structure and the rebound values are displayed on a mechanical sliding scale. These values can then be correlated to compressive strength by using the conversion table chart affixed to the hammer. The original Schmidt ® hammer is known for its durability and accuracy. Schmidt ® Hammer, Type NH-2975 Schmidt ® Hammer, Type N (N/mm2)H-2975M Ship wt. 4.7lbs. (2.1kg) Schmidt ® Hammer, Type L ASTM D5873 The H-2975L hammer is designed for testing thin- walled structural components with a thickness of less than 4" (100mm) or rock cores. This hammer features an impact of 0.74 Nm, which is 1/3 less energy than type N hammers and uses a N/mm 2 scale. Schmidt Hammer, Type L (N/mm2)H-2975LM Ship wt. 4.8lbs. (2.2kg) Original Schmidt OS8000 ASTM C805, D5873; BS 1881: Part 202; ISOIDIS8045; ENV 206; IGJ/T 23-2001 The Original Schmidt OS8000 is the Original con- crete test hammer, now digitally redefined - and it is also the most advanced R-value hammer ever made, with unmatched performance, ease of use, and versatility, as well as reporting on the go thanks to its mobile app. This hammer provides both analog and digital functions. This allows you to take readings using the integral scale or use the digital functions, which offer several enhanced capabilities. It is designed for testing concrete within a compressive strength range of 1,450 to 10,152 psi (10 to 70 N/mm 2 ) and impact energy of the test is 1.6 ft-lbs (2.207 Nm). The Schmidt OS8000 is pressed against the concrete struc- ture and the rebound values are displayed on a mechanical sliding scale, as well as the digital readout on the top of the hammer. The hammer’s digital capabilities increase pro- ductivity by providing faster operation and great improvements of the time needed for taking read- ings. A free, mobile App is available, which func- tions via bluetooth technology on any compati- ble Apple ® iOS device (please see App Store for details) or any supported Android™ device (see Google Play Store for details). The App provides geolocation capabilities and access to a cloud- based web tool. This web-based reporting capa- bility provides you and others at different loca- tions to access report data. It provides extensive reporting abilities, including custom curves and ones to ASTM/EN standards. Reports and data are available in both .pdf or .csv file formats for use by computers. A bluetooth printer is also available for on-site printing of mobile App reports and the new Schmidt Live also provides audio output of results, if desired. The Schmidt Live runs on AAA batteries. Schmidt OS8000, Type N with AppH-2994 Schmidt OS8000, Type N with PrinterH-2994P Schmidt OS8000, Type L with AppH-2992 Schmidt OS8000, Type L with PrinterH-2992P Ship wt. 4.7lbs. (2.1kg) Silver Schmidt OS8200 ASTM C805, D5873; BS 1881: Part 202; ISOIDIS8045; ENV 206; IGJ/T 23-2001 Silver Schmidt OS8200 is as accurate, reliable, and versatile as ever—and now, connected, thanks to its optical measurement technology delivering Q-value measurements, paired with digital pro- ductivity features and user-friendly mobile apps. The Proceq Silver Schmidt OS8200 test hammer has been redesigned to provide unmatched accu- racy, repeatability and easy, intuitive operation. The Schmidt OS8200 features quicker and more accurate testing while addressing the previous insufficiencies of the traditional hammers. With the Schmidt OS8200 impact direction no longer has an impact on values; values are not affected by internal friction of the hammer operation, and, loss of accuracy because of seal problems is not an issue. In use, the Silver Schmidt OS8200 eliminates cocking the hammer for each blow and recording the results, the OS8200 allows you to do all your test blows in rapid succession, while it records the results. These results can then be reviewed. Intui- tive User Interface is language independent Humboldt provides repair and calibration services for concrete rebound hammers, Call: 1.800.544.7220 HC-27205.47 www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 CONCRETE Rebound Test Hammers through the use of easy-to-understand icons. The interface menu structure is similar to a mobile phone’s. Practically every command can be acti- vated either directly or via no more than 2 con- secutive steps. All data is automatically saved and may be reviewed via the data list. The mem- ory capacity is dependent of the length of tests in a series, but roughly 400 series with 10 read- ings each can be accomplished with the Silver Schmidt. A free, mobile App is available, which functions via bluetooth technology on any com- patible Apple ® iOS device (please see App Store for details) or any supported Android™ device (see Google Play Store for details). The Silver Schmidt hammer includes these standard acces- sories: battery charger with USB cable, data car- rier with software, carrying strap, grinding stone, chalk, documentation and carrying bag. Software provided for performing firmware upgrades and selecting presets only. Schmidt OS8200, Type N with AppHC-2720 Schmidt OS8200, Type N with PrinterHC-2720P Schmidt OS8200, Type L with AppHC-2721 Schmidt Bluetooth PrinterHC-2721PR Ship wt. 4.7lbs. (2.1kg) Grinding Stone for Rebound Hammers Replacement grinding stone for rebound hammers. Grinding StoneH-2975.27 Ship wt. 0.9lbs. (0.4kg) Verification Anvil for Rebound Hammers ASTM C805, D5873; BS 1881: Part 202; ISOIDIS8045; ENV 206; IGJ/T 23-2001 Verification anvil ensures continued test accuracy. For use with all test hammers. Hammers should be periodically checked to determine correct performance. Verification AnvilH-2972 Ship wt. 58bs. (26.3kg) Conversion Chart Labels Replacement conversion chart for rebound hammers. Conversion Chart Label (psi/MPa)H-2987H.7 Conversion Chart Label (psi)H-2975.25 Conversion Chart Label (N/mm2)H-2975.25N Ship wt. 0.5lbs. (0.22kg) H-2975.27 H-2987H Replacement Parts KeyDescriptionPart# 1Impact PlungerH-2987.1 3Housing, completeH-2987.3 4Rider with Guide RodH-2987.4 6Push-button, completeH-2987.6 7Hammer Guide BarH-2987.7 8Guide DiskH-2987.8 9CapH-2987.9 10Two-part RingH-2987.10 11Rear CoverH-2987.11 12Compression SpringH-2987.12 13PawlH-2987.13 14Hammer MassH-2987.14 15Retaining SpringH-2987.15 16Impact SpringH-2987.16 17Guide SleeveH-2987.17 18Felt WasherH-2987.18 19Acrylic Window w/ ScaleH-2987.19 20Trip ScrewH-2987.20 21Lock NutH-2987.21 22PinH-2987.22 23Pawl SpringH-2987.23 11 21 20 13 22 6 7 3 14.1 14.2 16 10 18 1 9 17 15 4 19 8 12 6 16 H-2972 H-2987H.7 H-2975.25N H-2975.25 11 21 20 13 22 3 7 14 10 18 1 9 17 15 4 19 8 23 12 Humboldt provides repair and calibration services for concrete rebound hammers, Call: 1.800.544.7220. REPAIR H-2975 Replacement Parts KeyDescriptionPart# 1Impact PlungerH-2975.1 3Housing, completeH-2975.3 4Rider with Guide RodH-2975.4 6Push-button, completeH-2975.6 7Hammer Guide BarH-2975.7 8Guide DiskH-2975.8 9CapH-2975.9 10Two-part RingH-2975.10 11Rear CoverH-2975.11 12Compression SpringH-2975.12 13PawlH-2975.13 14Hammer MassH-2975.14 15Retaining SpringH-2975.15 16Impact SpringH-2975.16 17Guide SleeveH-2975.17 18Felt WasherH-2975.18 19 Acrylic Window w/ Scale H-2975.19 20Trip ScrewH-2975.20 21Lock NutH-2975.21 22PinH-2975.22 23Pawl SpringH-2975.23 23 HC-2721PRwww.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 5 48 CONCRETE Compressive Strength H-2978 Windsor HP Probe System ASTM C803; BS 1881 The Windsor HP probe system is used to evalu- ate the compressive strength of in-place concrete. This non-destructive test can be used on fresh or mature concrete with equal effectiveness. The system features an electronic measuring device for accuracy and efficiency. Three individual tests can be automatically averaged and displayed on the LCD in compliance with ASTM procedures. The data, together with time and date of the test can be stored in the memory for uploading to a PC. Two probe and power load types are available: silver probes are used for high performance con- crete with strengths up to 17,000 psi (110 MPa) and gold probes for test applications on concrete with less than 3,000 psi (19.4 MPa) strength. The system consists of the drive unit, electronic mea- suring device, templates, measuring caps, gauge plates and carrying case. Probes are not included with this product and must be ordered separately. Windsor HP Probe System H-2978 Ship wt. 30.6lbs. (13.8kg) *For domestic sales only. Windsor HP Probe Kits Each certified probe kit includes 3 probes and 3 matched, nickel-plated power loads. Silver probe kit is for natural stone or coarse aggregate (den- sity greater than 125 lbs/cu ft). Gold probe kit is for lightweight aggregate (less than 125 lbs./cu. ft. density) Can not be shipped via air or ocean. Windsor Silver Probe Kit (3 probes)H-2978 01 Windsor Gold Probe Kit (3 probes)H-2978 03 Ship wt. 0.4lbs. (0.1kg) Windsor Silver Probe Kit (75 probes)H-2978 01C Windsor Gold Probe Kit (75 probes)H-2978 03C Ship wt. 10lbs. (4.5kg) *For domestic sales only. Windsor HP Pin System Measures the compressive strength of concrete, mortar and brick in-situ, quickly, accurately. A non-explosive instrument, the Windsor Pin™ sys- tem uses a spring-loaded device to drive a steel pin into the concrete or mortar. The depth of pene- tration of the needle correlates to the compressive strength of the material under test. A removable chuck and a small pin size facilitate the testing of mortar joints; this is the only system for testing the in-place strength of brick mortar joints. Pins are not included, see below. Windsor HP Pin SystemHC-2978 Ship wt. 20lbs. (9kg) Steel Pins for Windsor Pin System Box of 40 pins. Steel Pins for Windsor Pin SystemHC-2978 1 Ship wt. 2lbs. (0.9kg) Replacement Micrometer for Windsor Pin Replacement MicrometerHC-2978 2 Ship wt. 2lbs. (0.9kg) *For domestic sales only. H-2978.01 H-2978.03 HC-29785 49 www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 CONCRETE Ground Penetrating Radar Proceq Portable GPR Live GP8000 ASTM D4748, D6087, D6432; AASHTO R37-04; ACI 228.2R.98; EN 302066- ETSI The Proceq GP8000 portable ground penetrating radar instrument is the beginning of a new era in NDT. The outstanding, patented ultra-wideband technology combined with a compact wireless probe delivers unmatched industry performance. Just connect to your iPad and detect objects and back walls reliably, with amazing clarity and ease of use. Proceq GP8000 is the world’s first large-scale inspection solution that utilizes augmented real- ity in industrial applications, and is now available on Apple iPad with iOS 12. You can now augment the world around you with 2D and 3D visualiza- tions of GPR data and insights merged seam- lessly with your local environment. Proceq GP8000 ground penetrating radar fea- tures the unique stepped-frequency continu- ous-wave radar technology, which delivers the widest bandwidth in the market and in a hand- held device. All applications that have typically been addressed with multiple separate anten- nas in the range of 0.9 to 3.5 GHz can now be covered with a single device — this means that you do not need to buy and switch to a different antenna for every inspection challenge. Unlike traditional devices with pulsed GPR technology, Proceq GP8000 enables you to detect features of various types and sizes with an unmatched depth penetration. The powerful, user-friendly Proceq GPR Live app for Apple ® iPad, together with the wireless Proceq GP8000 probe, make it possible to perform real- time, on-site data analysis, sharing, and collabo- ration, like no other product in its category. The Proceq GPR Live app for Apple ® iPad is designed to simplify the entire assessment pro- cess of concrete structures. As an example, the integrated wizard assists you with audio feed- back during area scans. The intuitive object iden- tification marker is another great feature that makes the life of every operator easier. The Pro- ceq GP8000 probe wirelessly connects to its app for Apple ® iPad. Thus, Proceq GPR Live allows instant imaging on a high-resolution touchscreen of up to 12.9" diagonal (iPad Pro) – this makes it the ground penetrating radar inspection solution with the largest and most crisp display in the industry. The wireless, compact Proceq GP8000 probe is built into a lightweight but highly-durable hous- ing, and ensures reliable, high-quality measure- ment results even when operated in the most challenging environments. Additionally, the probe operates with standard rechargeable AA bat- teries to guarantee smooth air travels and easy battery replacements worldwide. Proceq GP8000 Pro delivers a rich set of intuitive features that help you get the job done with peace of mind. It includes a built-in Live Wire kit, cloud-enabled sync and collaboration, export of raw data to SEG-Y, on-site touch-happy visualizations in 2D and 3D, Augmented Reality, and more. The superbly intuitive mobile app is supported by software updates that deliver enhancements and new features. Robust accessories, such as the telescopic rod, are also optionally available. As a result, Proceq GP8000 is the one true all- in-one handheld GPR, and the most modern and future-proof ground penetrating radar instru- ments in the world. Proceq GP8000, ProHC-2968A Ship wt. 3lbs. (1.4kg) HC-2967A & HC-2968A Accessories ItemPart No Tablet Holder HC-2968.1 Telescopic rod/tablet holder (iPad Air/Mini) HC-2968.2 Battery pack 8x AA NiMH HC-2968.3 Grid Paper 60 x 60/5cm (set of 5) HC-2968.4 Grid Paper 60 x 60/10cm (set of 5) HC-2968.5 Grid Paper 24 x 24/2"(set of 5) HC-2968.6 Grid Paper 24 x 24/4"(set of 5) HC-2968.7 Chalk (set of 10) HC-2968.8 FeaturesBasicPro Ultra-wideband GPRX X Basic time-slice viewX X Pro time-slice view X 3D View X Data sharing & reporting X Secure cloud features X (shown with iPad, not included) Specifications Measuring principle Stepped-frequency continuous-wave GPR Frequency range 0.2 to 4.0 GHz Central frequency 2.4 GHz Bandwidth 2.85 GHz Maximum peak power -7 dB EIRP Max. depth range 28" (70cm) on dry concrete Dimensions 8.7" x 7.1" x 5.6" (220 x 180 x 143 mm) Weight 4.4 lb (2 kg) Battery (8) AA (alkaline or rechargeable) Battery lifetime 3.5 hours of continuous use Display Any iPad Operating temperature 14 to 122°F -10 to 50°C Humidity <95% RH, non-condensing IP classification IP54 Export (Pro only) Measurement (Proceq GPR Live app file), snapshot (JPG), chart (CSV) Languages English, German, Japanese, Chinese, Korean Regional settings Imperial/metric unitswww.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 5 50 CONCRETE Ground Penetrating Radar Proceq Ultra Portable GP8800, Pro ASTM D4748, D6087, D6432; AASHTO R37-04; ACI 228.2R.98; EN 302066- ETSI Proceq’s Ultaportable Ground Penetrating Radar, GP8800 is yet another revolution by Proceq in concrete inspection and imaging. The rugged, lightweight Swiss Made probe packs our unique radar technology in a tiny footprint with gigantic clarity and depth. This makes it possible to locate rebar and tendon ducts by inspecting overhead, in tight spots, close to walls, from the edge of the slab—and in congested spaces, such as under- neath pipes. Connect the powerful probe to your iPad and enjoy the rich features of the famously user- friendly Proceq GPR Live app. Inspect with ease in four different configurations by reorienting the wireless wheel on the fly, even during the mea- surement, without screws or tools. Enjoy powerful post-processing, visualization, sharing, collabora- tion and reporting anywhere, anytime—in 3D and Augmented Reality. Proceq GP8800 is the only ground penetrating radar in the market that offers complete, wireless autonomy and flexibility in an mini, ultra porta- ble, lightweight probe that connects to iPad over encrypted Wi-Fi. There is no need to connect Proceq GP8800 to any master GPR device with long, thick, and frag- ile cables that adversely impact data quality. Say goodbye to tripping hazards, and welcome con- venient scanning, even overhead. As for flexibility: the wireless wheel snaps effort- lessly on any side of the probe in both trailing and side-car configurations, and can be rotated at will for cross-polarization, even while you scan— without fumbling with screws or tools. Proceq GP8800 is powered by a battery pack with rechargeable AA batteries, enabling smooth air travel and easy battery replenishments worldwide. Need unlimited autonomy, better access to tight spaces, or both? Simply tether the battery pack or an off-the-shelf power bank by USB-C and scan under pipes with as little as 63 mm (2.5 in) dis- tance to concrete—for hours and hours. Proceq GP8800 features the unique implemen- tation of Stepped-Frequency Continuous-Wave (SFCW) radar technology by Proceq, delivering the most ultra-wide bandwidth ever in a handheld GPR device. As proven by the explosive global adoption of Proceq GPR Live by expert GPR users since 2017, SFCW GPR technology by Proceq delivers far superior signal-to-noise ratio compared to tradi- tional high-frequency pulsed GPR devices for con- crete scanning. Now available in the ultra portable form factor of Proceq GP8800, SFCW GPR will continue to impress you with superior inspection insights thanks to crystal-clear radar data, without the traditional dilemma between multiple pulsed- GPR antennas, center frequencies, and their hard compromises between resolution and penetration depth. Proceq GP8800, ProHC-2968U Ship wt. 0.4lbs. (0.1kg) HC-2968U (shown with iPad, not included) Specifications Radar technology Stepped-frequency continuous-wave GPR Frequency range400 – 6000 MHz Depth penetration*65 cm / 25.6 in Dimensions** 90 x 90 x 60 mm / 3.5 x 3.5 x 2.4 in Weight**460 g / 16.2 oz Max. line scan length1000 m / 3281 ft Max. area scan size 120 x 120 cm / 47.2 x 47.2 in Antenna distance to edge 45 mm / 1.77 in Path measurement Wireless wheel, ±2% accuracy Cross-polarization Yes, adjustable at any time Ground clearance0 mm / 0 in Built-in battery Removable pack, 4x AA (NiMH), flight-safe Off-the-shelf power bank5V DC, at least 2A Autonomy 2.5 h (up to 8 hours with off-the-shelf 10'000 mAh power bank) Connectivity Wi-Fi ® and USB-C to iPad Operating temperature -10 to 50 °C / 14 to 122 °F Operating humidity <95% RH, non-condensing IP ratingIP54 Exporting formats JPG, PNG, CSV, SEG-Y, HTML Accessories ItemPart No Telescopic rod HC-2968U.2 Battery complete HC-2968U.3 Grid Paper 60 x 60/5cm (set of 5) HC-2968.4 Grid Paper 60 x 60/10cm (set of 5) HC-2968.5 Grid Paper 24 x 24/2"(set of 5) HC-2968.6 Grid Paper 24 x 24/4"(set of 5) HC-2968.7 Chalk (set of 10) HC-2968.85 51 www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 CONCRETE Rebar Location Zircon MT7 Rebar Locator ACI 318; BS 1881 Part 204 MetalliScanner ® MT7 metal detector quickly and easily locates rebar, pipes, and other metal before you saw or drill. The bright, backlit display indi- cates metal target depth (inches and centime- ters) up to 6" deep, type of metal located (ferrous or non-ferrous), and whether you are moving towards or away from a target. Use to find and avoid rebar in concrete before drilling, to find pipes and junction boxes behind tile, and even detect the nails/tacks in studs behind lath and plaster walls. This powerful tool saves time and money by eliminating guesswork, rework, needless holes, and costly broken drill bits or saw blades. Rec- ommended uses include locating and reinforcing rebar in masonry and measuring subsurface nail spacing in roofing material for compliance with building codes. •Features two scanning modes; Standard mode DeepScan mode •Locates and determines the depth of 0.5" rebar and 0.5" copper pipe up to 6"(15cm) deep •Finds and differentiates ferrous and non-fer- rous metal •Position accuracy to within ± 0.5" (13mm) for #4 rebar or 0.5" copper pipe •Backlit display and audio tone clearly indicate location of target •Rubberized handle and built-in lanyard loop •Pivoting handle attachment for extended and overhead reach can be used with standard threaded broom handle, etc. •Includes 9V battery and protective carrying case. Zircon MT7 Rebar LocatorHC-2969 Ship wt. 3lbs (1.4kgs) Zircon MT 6 Rebar Locator ACI 318; BS 1881 Part 204 Locate embedded metal before your drill bit or saw blade does. This powerful dedicated metal scanning tool can locate metal up to 6 inches deep in solid concrete. The MT6 locates both ferrous and non-ferrous metal up to 6" (152mm) deep in concrete and other non-metallic surfaces. It also differentiates between ferrous and non-ferrous metal targets and indicates the target depth in inches and centimeters. The MT6 indicates when you are approaching a metal object with a large plus (+) sign on the display. When the plus becomes a minus (-), you have crossed over the target and are now moving away. Use to avoid rebar, cables, pipe, nails in reclaimed wood, nails/tacks in studs behind lath & plaster walls, electrical boxes and conduit, and more. The MT6 is the tool recommended by the My Safe Florida Home Program to assist in hurricane loss mitigation. Automatically differentiates between magnetic metal (such as rebar) and non-magnetic metal (such as copper pipe). Shows the depth of metal from the surface in both inches and centimeters. Easy-to-read LCD screen pinpoints the location of metal objects to the nearest 0.5" (13mm) and depth to the nearest inch (25mm).Helps map out the grid of metal through any nonmetallic con- struction material, including concrete, tile, and marble. Zircon MT6 Rebar LocatorHC-2976 Ship wt. 3lbs (1.4kgs) HC-2976 HC-2969 Scan Me! For more information, view all products, or videos visit our website www.humboldtmfg.com.www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 5 52 CONCRETE Rebar Location Profometer PM8000 Lite Cover Meter The PM8000 Lite is the powerful successor of the Profoscope and completes the Profometer family. Designed and produced in Switzerland for high- est quality and performance for professional rebar detection. Find your rebars, determine the covers and estimate the diameter – fast and at the press of a button. Features: •Compact, ultra light-weight - designed for use in rough environments •Spot measurement (Cover Meter, Diameter Estimation) •Neighboring Rebar Correction 1st layer Includes: •PM8000 Cover Meter (no cart) •2x rechargeable NiMH battery •Battery charger •Carrying Strap •Chalk •Quickstart Guide •Carrying Case Profometer PM8000 LiteHC-3071 Ship wt. 1.5lbs. (.68kg) Profometer PM8000 Rebar Diameter & Cover Meter Profometer PM8000 Rebar Diameter & Cover Meter wireless solution for spot measurements. The advanced cover meter, from rebar detection to line scanning. Precise rebar cover measure- ments and diameter estimation with great clarity. •Unrivaled precision thanks to a sophisticated data interpolation & intelligent auto-mode •Superior ergonomics with compact, ultra light-weight and fully wireless sensor •Unmatched productivity with instant availabil- ity of data analytics and visualization Includes: •Sensor •Cart •2x rechargeable NiMH battery •Batteries charger •Carrying strap and case •Chalk •Quick start guide Profometer PM8000HC-3072 Ship wt. 1.5lbs. (.68kg) Profometer PM8000 Pro Rebar Diameter & Cover Meter Profometer PM8000 Pro Rebar Diameter & Cover Meter wireless solution for spot measure- ments, line & area scanning. The cover meter for experts, from rebar detection to area scanning. Precise measurements with unique advanced visualization. •Sophisticated data interpolation and intelligent auto-mode eliminate error margin. •Compact, ultra light-weight and fully wireless designed for use in rough environments •Instant availability of data analytics and visu- alization in the field, data synchronization and collaboration Includes: •Sensor •2x rechargeable NiMH battery •Batteries charger •Carrying strap and carrying case •Chalk •Quick start guide Profometer PM8000 ProHC-3073 Ship wt. 1.5lbs. (.68kg) HC-3073HC-3072 HC-3071 Profometer Accessories Telescopic rod & Tablet Holder for PM8000 Profometer HC-3071.7 Tablet holder with Chest Strap for PM8000 Profo- meter HC-3071.8 Specifications TechnologyEddy-currentMax Scanning Speed 0.5m/s - 1.7 ft / s ConnectionWirelessMax Line Scan Distance 1km / 0.6 miles Cover Measuring DepthUp to 185 mm / 7.3 inMax Area Scan 10'000m 2 / 107'000 ft 2 Cover Measuring Accuracy +/-1 mm / 0.04 in to 4 mm /0.16 in depending on depth Display High-contrast OLED screen Rebar Diameter Measuring Depth up to 63 mm / 2.5 inDimensions 250 x 130 x 45 mm / 9.8 x 5.1 x 1.8 in (with cart) 190 x 75 x 45 mm / 7.5 x 3.0 x 1.8 in Rebar Diameter Measuring Accuracy +/- rebar sizeBattery 2 x AA (NiMH) rechargeable or non re- chargeable, Removable, Flight-safe, 8 hours au- tonomy, USB-C power bank (not included) Encoder Accuracy +/- 0.5mm / 0.02 in + 0.5% of measured length5 53 www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 CONCRETE Corrosion Profometer PM8500 Corrosion Kit ASTM C876 The newly, redesigned PM8500 Profometer Cor- rosion has made a significant leap in providing major gains in ease-of-use, productivity, ergo- nomics and enhanced on-site data. The Profo- meter PM8500 Corrosion is a high-quality, pow- erful instrument used to measure the likelihood of corrosion using the half-cell potential method. The new HC-2873A Profometer Corrosion's new design now utilizes an iOS app, which is used with an Apple iPad, supplied by the user, for all control functions. (iPad Sold Separately.) The PM8500 sensor is wirelessly connected to an iPad via low-power Bluetooth, which runs the downloadable Profometer app. Given mobile data connectivity (Wi-Fi or mobile network), the Profo- meter (pm) app automatically and safely stores all measurements on the Screening Eagle Work- space, where you can log in to see the data from any internet-connected device. The Profometer comes with a Rod electrode for spot scans, which allows you to scan small areas, such as columns, beams and footings. The Pro- fometer can also be fitted with optional Wheel Electrodes. These come in single- and four-wheel models listed below. The Profometer PM8500 Corrosion is a high-qual- ity, powerful instrument used to measure the like- lihood of corrosion using the half-cell potential method. New Features: •Flexible and fixed grid •Advanced and basic mode •Temperature correction •Potential shifting •Skipping lines / distance •Overwriting data •Add voice and text markers •Logbook •Length calibration •Real dimension Sensor Unit and Electrodes Features: •Wireless connection between probe and dis- play unit (iPad, sold separately) •Less cables and better located •Lighter system with more ergonomics •Strongest telescopic rod •Plugs and connector improved •Redesign of wiring system •More comfortable to carry on •NEW one-wheel electrode redesigned and more stable •NEW four-wheel electrode with variable wheel spacing Profometer Corrosion Meter Kit Includes: •PM8500 half-cell potential sensor unit •Rod Electrode with cable & large sponge •Cable roll of 25m including clamp •Copper Sulphate CuSO4 •Universal holder for sensor & iPad chest harness •Quick Start Guide •2 AA Batteries, charger and USB-C cable •Carrying Case •iPad harness holder (iPad NOT INCLUDED) •Profometer App •Order Electrode Separately. Profometer Corrosion Meter KitHC-2873A Ship wt. 15lbs (6.8kg) Profometer Corrosion Specifications Voltage Measuring Range -1000 to +1000 mV Voltage Resolution1 mV Impedance100 MΩ Sampling Rate900 Hz Display 7" color display 800 x 480 pixels Memory Internal 8 GB flash memory Regional Settings Metric and imperial units and multi-lan- guage and time- zone supported Power Input12 V +/-25% /1.5 A Dimensions250 x 162 x 62 mm Weight (of display device) About 1525g (incl. battery) Battery3.6 V, 14 Ah Battery Lifetime > 8h (in standard operating mode) Humidity < 95% RH, non condensing Operating Temperature-10°C to +50°C IP Classification Touchscreen IP54, universal probe IP 67 Profometer Corrosion Accessories Rod Electrode HC-2873A.2 One-Wheel Electrode HC-2873A.3 Four-Wheel Electrode HC-2873A.4 Large Contact Sponge for Rod Electrode, Half-Cell Potential (Set of 5) HC-2873A.2.1 Half-Cell Potential Copper Sulphate HC-2873A.10 HC-2873A (shown with iPad not included) HC-2873A.2 HC-2873A.3 HC-2873A.4 HC-2873A.2.1www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 5 54 CONCRETE Corrosion, Ultrasonic iCOR™ Giatec ICOR™ is a unique non-destructive testing tool for detailed detection and evaluation of corro- sion in reinforced concrete structures without the need to have an electrical connection to the rebar. iCOR™ is equipped with high-precision sensors to measure: •Corrosion potential mapping of rebar •Corrosion rate mapping of rebar •Real In-situ electrical resistivity of concrete •Ambient temp. and relative humidity of rebar •On-site assessment of concrete durability iCOR™ utilizes wireless technology to trans- mit data to a tablet, where data can be stored, analyzed and visualized. Moreover, the tab- let app offers a powerful post-processing tool and an easy way to share the results with other team members. iCOR™ can significantly save time, human resources and cost in the condition assessment of concrete structures. iCOR™ employs a complex electrical circuit model for predicting different properties of concrete materials, and steel reinforcement. An advanced mathematical algorithm is implemented in the core software of the device. This software pro- cessor is responsible for the analysis of certain characteristics of reinforced concrete structure such as the polarization resistance of embed- ded reinforcement and the “real” electrical resis- tivity of concrete. Includes: ICOR™ measuring device; measurement cable; charging cable; table charging cable; (3) contact sponges (half cell); (12) contact sponges (corrosion) electrode storage solution; conductive gel; spray bottle; case; data recording app; tablet and carrying support, tablet charger and verification kits. Giatec iCOR™ Essential Pkg HG-9047 Ship wt. 15lbs (6.8kg) CorMap Rebar Corrosion Mapping System ASTM C876; BS 1881 Part 201 The CorMap is a simple and economical instru- ment for use in identifying areas of probable rebar corrosion. The system consists of the voltmeter, two electrode extensions, reference electrode with copper sulfate reservoir, copper sulfate, wet- ting agent reservoir, dispensing sponge, 250 ft. (80m) cable reel, and a heavy-duty carrying case. In operation, the high impedance voltmeter is con- nected between the reinforcing steel and the ref- erence electrode on the concrete surface where a measurement can be made for the half-cell poten- tial. This measurement is then used to determine the probability of corrosion activity. By testing at a fixed distance apart, a grid of half-cell potentials can be developed and areas delineated. CorMap Rebar Corrosion Mapping SystemH-2872 Ship wt. 24lbs. (10.8kg) Copper Sulfate, 12 oz. (355ml) Container For use with the CorMap mapping system. Copper Sulfate, 12 oz (355ml)H-2872 1A Ship wt. .75lbs. (.34kg) Giatec Perma2™ Rapid Chloride Permeability ASTM C1202. C1740; AASHTO T277 Perma2™ is a laboratory test device for measur- ing the electrical resistance of concrete against the penetration of chloride (RCPT) according to the standard methods such as ASTM C1202, AASHTO T277 and ASTM C1760. The measure- ment data derived from this test method can be used to estimate the chloride diffusion coefficient of concrete in service life predictions and structure design, as well as durability-based quality con- trol of concrete. Perma2™ is electrically certified for rapid chloride penetrability testing in concrete laboratories and is the only RCPT device that meets the specifications of ASTM and AASHTO specifications. Perma2™ provides an easy-to-use, stand-alone testing device, which is accurate to ±0.1mA. It can test up to 4 samples at a time with a flexible log- ging time of 1-10 minutes depending on test and sample parameters. It also features automatic temperature control and customizable setups. Applications: •Concrete’s ability to resist chloride ion penetration (ASTM C1202, AASHTO T277) •Bulk electrical conductivity of concrete (ASTM C1760) •Performance-based quality control of concrete •Estimation of chloride diffusion coefficient of concrete •Estimation of chloride migration coefficient of concrete •Estimation of the remaining life of concrete structures •Service life design of concrete structures Perma2™ unit includes complete set of test cells, Temperature sensors, test cables, power cord, USB cable, user manual, communication soft- ware, gauge vacuum pump assembly, desiccator assembly, PC software and USB connection. Perma2™ Complete 120V 60HzHG-9036 220V 50/60HzHG-9036 4F Ship wt. 125 lbs. (56.6 kg.) Perma2™ less Pump and Desiccator 120/220V 50/60HzHG-9020 3F Ship wt. 40 lbs. (18.1 kg.) H-2872 Perma2™ Accessories / Replacement Parts Perma2™ Device, 110/220 50/60Hz HG-9044.3F Perma2™ Test Cell HG-9021 Stainless Steel Mesh - Pair HG-9027 Sample Prep Package, 115V 60Hz HG-9042 Sample Prep Package, 230V 50/60Hz HG-9042.4F Rubber Gasket Cast - Pair, 4" (100mmm) Dia. HG-9028 Rubber Gasket Core - Pair 3.75" (95mm) Dia. HG-9039 Test Cable Set HG-9022 Temperature Sensor HG-9023 HG-9036 iCOR™ Specifications Testing Time 3 to 15 seconds Corrosion Rate 0 ~ 300 µm / year Corrosion Potential +200 to -800 mV / CSE Electrical Resistivity 0 ~ 10,000 Ω • m Operating Temp. 32 to 113°F (0 ~ 45°C) Operating Humidity 20~ 90% RH Dimensions 250 x 70mm Weight 900g HG-90475 55 www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 CONCRETE Ultrasonic H-2877.1 H-2878 H-2877 The Chlorimeter Chloride Test System A field kit for the determination of chloride ion content in concrete, fresh cement, masonry, most other construction materials, and water. The determination of the chloride ion concentration in concrete is essential in assessing the need for maintenance on, for example, bridge decks and parking structures. The test can also be used to ensure that materials used in new construction are free from potentially harmful chloride ion levels. The Chlorimeter produces results on-site, within minutes that are accurate and comparable to expensive laboratory tests. With this method, the concentration of acid soluble chlorides is mea- sured. In most cases, this is equivalent to total chloride concentration. It measures the electro- chemical reaction of a weighted sample placed in an extraction liquid. It automatically shows a tem- perature compensated reading of percent of chlo- rides on its digital display. A wide range— from 0.002 to 2% chloride by weight— is covered. Kit does not include required hand drill or extraction and calibration liquids, which can be ordered below. Chlorimeter Chloride Test SystemH-2877 Ship wt 14lbs. (6.3kg) Extraction and Calibration Liquid, small kit Pack of 12 jars of extraction liquid and 5 jars of calibration liquid. Extraction and Calibration Liquid, SmallH-2877 1 Ship wt 0.5lb. (0.2kg) Extraction and Calibration Liquid, large kit Pack of 100 jars, extraction liquid and 20 jars of calibration liquid. Extraction and Calibration Liquid, LargeH-2877 2 Ship wt 5lb. (2.2kg) ASR Detect ASR Detect™ is both a practical and a scientific tool. Its principal application is analyzing exist- ing concrete structures. By identifying alkali silica deterioration in its earliest stages, the ASR Detect facilitates the problem being identified when remediation techniques can be applied; for exam- ple, treating the concrete with a lithium-bearing solution to inhibit further deterioration. Where deterioration is advanced, ASR detect provides a clear picture of the extent and depth of the damage. As a scientific tool, ASR detect can be applied to improving the understanding of where, how and why ASR occurs. That understanding is basic to developing ASR preventatives that allow high-al- kali cements or poor-quality aggregates to be used in concrete mixes without risking the devel- opment of ASR. To identify alkali silica reaction (ASR) in concrete, two reagents are applied to the broken surface of a concrete core and the excess rinsed off. On con- taminated concrete, the resultant stains reveal the presence of ASR. The stains also reveal the extent of the ASR in the concrete and indicate the stage of ASR progression. Yellow indicates that degra- dation has begun; pink warns that degradation is advancing. ASR DetectH-2878 Ship wt 10lbs. (4.5kg) Carbo Detect Carbo Detect™ is a simple colored dye field test for detecting carbonation. The single reagent is sprayed on the surface to be checked. The reagent will change to pink in uncarbonated concrete and remain colorless when sprayed on carbonated concrete. Carbo DetectH-2874 Ship wt 1.3lbs. (.6kg) Ultrasonic Pulse Velocity Tester ASTM C597; BS1881:203; EN 12504 Used to determine the presence of faults, voids, cracks, etc. in-situ or precast concrete and for long-term monitoring of structures subject to environmental conditions. Gives data concerning the homogeneity of the concrete, by generating pulses of sound into the concrete and measuring the time the sound takes to travel from the trans- mitter probe to the receiver probe through the material. Measuring range: 0 - 3000 µs - accuracy +/- 0,1 µs. •Selection of the ultrasonic pulse amplitude adjustable from 250 to 1000 V •Measurement of the required time by the ultra- sonic pulse to go through the tested material. •Single or continuous acquisition mode with automatic or manual saving. •Calibration of a defined time value. •Capacity of data acquisition, processing and filing of the test data up to 30.000 samples. •Interface mini USB for PC connection. •2 outlets for connection to the oscilloscope. Includes (2) 55kHz probes with cables; calibration rod and paste; rechargeable battery pack and case. Ultrasonic Pulse Velocity TesterHC-6390 Ship wt 3lbs. (1.6kg) H-2874 Accessories for HC-6390 55 kHz Transmitting/receiving replacement probes HC-6390.1 Exponential 150 kHz Transmitting/receiving probes HC-6390.2 Exponential 55 kHz Transmitting/receiving probes HC-6390.3 Exponential 24 kHz Transmitting/receiving probes HC-6390.4 Probe Cables (2) 12' (3.5m)HC-6390.5 Probe Cables (2) 33' (10m)HC-6390.6 HC-6390Next >