< Previouswww.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 1.10 SOIL FIELD Nuclear Density Gauge Accessories Nuclear Gauge Tool Set Tool kit includes: rod guide/scraper plate, drill pin, four-pound hammer, pin extraction tool and zip- pered accessory case. Nuclear Gauge Tool SetHS-200112 Ship wt. 16lbs (7.2kg) Drill Rod Drill rod used to create hole for Humboldt nuclear gauges to take reading. Rod measures 0.875" x 20" L. Drill RodHS-200130 Ship wt. 4lb (1.8kg) Rod Extraction Tool Tool used to extract drill rod from compacted soil. Rod Extraction ToolHS-200145 Ship wt. 2lb (0.95kg) Scraper Plate/Rod Guide Template Plate used as a locator for driving Drill Rod into compacted soil, as well as a guide for Gauge positioning and a Scraper Plate to level the test site. Scraper Plate/Rod GuideHS-200127 Ship wt. 8lbs (3.6kg) Hammer, 4 lb., Double-Faced Hammer used to drive Drill Rod into compacted soil. Hammer, 4 lb., Double-FacedHS-000176 Ship wt. 5lb (2.2kg) Red Security Seal Red security seal for nuclear density gauge trans- port cases. 7.5" L X .375" W. Red Security SealHS-000159 Ship wt. 1lb (0.07kg) Leak Test Kit Each leak test kit contains all of the materials nec- essary for users to perform a leak test on sealed source devices. These test kits include analysis service from Humboldt. Humboldt Scientific, Inc. provides leak test kits and analysis services for both portable and fixed nuclear gauges in accor- dance with Wipe Test Procedures. Humboldt is licensed by the North Carolina Division of Radi- ation Protection license # 092-0750-1 to provide sealed-source leak testing on any radioactive material with atomic number 3-105 inclusive; and, has National reciprocity recognition. State- of-the-art leak testing equipment, low cost, and prompt turn-around service ensure accurate and convenient measurement of your samples. Leak Test Kit, 10-packHS-200177 Leak Test Kit, 2-packHS-200185 Ship wt. 1lb (0.45kg) Replacement Case for Humboldt Gauge Durable case, built to stand up to the rigors of everyday usage. Holds nuclear gauge and all tools and paperwork. Replacement CaseHS-200681 Ship wt. 36lb (16.3kg) Padlock Padlock, which can be keyed so a set uses the same key. PadlockHS-000177 Ship wt. 1lb (0.07kg) Sign, Caution Radioactive Material 8 x 10" metal sign with Radioactive Symbol and Caution. Sign, Caution Radioactive MaterialHS-001057 Ship wt. .01lb (0.004kg) Transit Label – Yellow II DOT, Type 7A Radioactive materials transport label required for transporting nuclear density gauges. Transit Label – Yellow IIHS-200153 Ship wt. 0.01lb (0.004kg) Cargo Aircraft Only Label Label that is required when shipping nuclear gauges by aircraft. This label needs to appear on 2 sides of the transport case. Cargo Aircraft Only LabelHS-000167 Ship wt. 0.01lb (0.004kg) Type A Label DOT, Type 7A Radioactive materials transport label required for transporting nuclear density gauges. Type A LabelHS-200152 Ship wt. 0.01lb (0.004kg) Humboldt S/N Label for HS-5001 Cases Required serial number plate for gauge case. Humboldt S/N LabelHS-200541 Ship wt. 1lb (0.07kg) HS-001057 Tool Set HS-200112 HS-200130 HS-200145 HS-000176 HS-000159 HS-200541 HS-200152 HS-000167 HS-200127 HS-000177 HS-200177 HS-200681 HS-2001531.11 www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 SOIL FIELD Nuclear Density Gauge Accessories HS-200800— Containment Boxes include mounting bracket Nuclear Gauge Containment System The NUX safety containment box is an enhanced field security system for nuclear gauges. Con- structed of heavy-duty aluminum diamond plate, the NUX can be securely mounted to a host vehi- cle using the locking hinge pin. The box features a titanium series, high-strength lock assembly, which provides a secure storage enclosure for your gauge in its factory protective container. In addition, the NUX tilting feature makes access- ing your gauge an easy operation. Help prevent theft, damage, back injuries, misuse of equipment, improper or unauthorized access to equipment or other misguided actions, which may result in unforeseen costs to your company. NUX Case for Humboldt GaugesHS-200800 NUX Case for Troxler Gauges 3400 Series HS-200802 NUX Case for CPN GaugesHS-200803 NUX Case for T-4640 Series GaugesHS-200805 Ship wt. 65lbs (29.4kg) Radiation Alert Monitor 200 The HS-130508 Monitor 200 measures alpha, beta, gamma, and x-rays. Its digital display shows readings in your choice of CPM, CPS, µSv/hr, mR/ hr, or in accumulated counts. It has a digital dis- play, a red count light, and a beeper that sounds with each count detected. Other features include an adjustable timer, and selectable alert. With the free Observer USB Software Family, you can set computer alarms, calibrate your instrument, and download your collected data from the inter- nal memory for easy reporting. Includes: Carry- ing Case, Xtreme Boot, Stand, Mini-USB Cable, Observer USB Software Download, Certificate of Conformance. Monitor 200HS-130508 Monitor 200, NIST TraceableHS-130508C Ship wt. 2lbs (0.9kg) Radiation Survey Meter, Analog The HS-130512 survey meter is a compact, general purpose meter capable of detecting alpha, beta, gamma, and x-rays over 3 select- able ranges. A red count light flashes and a beep sounds with each event detected. Uses one 9-volt alkaline battery. Battery life is up to 2,000 hours at normal background radiation levels. Survey Meter, AnalogHS-130512 Survey Meter, Analog, NIST TraceableHS-130512C Ship wt. 2lbs (0.9kg) HS-130508 HS-130512 When the metal transportation box is mounted in a vehicle it effectively becomes part of the vehicle It is not part of the TYPE A package nor is it an overpack as defined by U S DOT Therefore, the mounted transportation box is not subject to HAZMAT labeling requirements and no radiation warning markings are required on it NOTES Mounting Bracket for all NUX Boxes HS-200801 Locking Hinge Pin HS-200804 Operating Range mR/hr - .001 (1µR) to 100 mR/hr; µSv/hr - .01 to 1000; CPM - 0 to 350,000; CPS - 0 to 5000; Total/ Timer - 1 to 9,999,000 cts. Gamma Sensitivity 1000 CPM/mR/hr referenced to Cs-137 Accuracy ±10% typical (NIST), ±15% maximum Energy Sensitivity Detects alpha down to 2.5 MeV; typical detection efficiency at 3.6 MeV is greater than 80%. Detects beta at 50 keV with typical 35% detection efficiency. Detects beta at 150 keV with typical 75% detection efficiency. Detects gamma and x-rays down to 10 keV typical through the window, 40 keV minimum through the case. Normal back- ground is 5-20 CPM. Operating Range 0-.5, 0-5, 0-50 mR/hr; 0-500, 0-5,000, 0-50,000 CPM or 0-500 µSv/hr 0-50 mR/hr. Gamma Sensitivity 1000 CPM/mR/hr referenced to Cs-137 Accuracy ±15% of reading (referenced to Cs-137 Energy Sensitivity Detects alpha down to 2.5 MeV; typical detection efficiency at 3.6 MeV is greater than 80%. Detects beta at 50 keV with typical 35% detection efficiency. Detects beta at 150 keV with 75% typical detection efficiency. Detects gamma and x-rays down to 10 keV typical through the window, 40 keV minimum through the sidewall of the detector. Normal background is approximately 10-20 CPM. For Recalibration and NIST-traceable calibration of meters, contact Humboldt Scientific at: 1.800.537.4183 NOTESwww.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 1.12 SOIL FIELD SOIL FIELD Online Class Humboldt’s Online Narrated Radiation Safety Course covers the same mate- rial as our Live Classes. So, if you can’t make a live class, this is the perfect alternative to getting your certificate of training. Humboldt’s Online Radia- tion Safety Class is accepted for the purpose of certification required for an operator to handle portable moisture density gauges. Those who success- fully complete this class and quiz should possess the necessary knowledge of radiation safety and the operation of nuclear gauges. This satisfies the requirements of the USNRC and the Agreement States, for gauges manu- factured by Humboldt and other manufacturers of nuclear gauges (portable moisture/density gauges). Certification Test This test can be used as a certification that the operator has successfully passed a nuclear gauge safety certification class, which covers the training criteria of NUREG 1556 and the Agreement States. This certification also includes a U.S. DOT HAZMAT refresher course, which meets the require- ments of CFR Title 49, Part 172, Sub-Part “H” (includes IATA requirements) and is eligible for use in every State. A certificate of training will be issued to those who successfully pass the test (scoring above 80%), and includes a signature line for the company’s RSO to validate the training and certificate. RADIATION safety training •Atomic Theory •Radiation Safety •Dose/Shielding Calculations •Accidents/Storage •Operation •Field Applications •Transportation •Risk •ALARA •Maintenance Radiation Safety Course Our training class to qualify in radiation safety and operation for users of nuclear portable Moisture Density Gauges. The class satisfies the USNRC and Agreement States’ requirements for gauges manufactured by Humboldt and other manufacturers of nuclear portable Moisture Density Gauges. A certif- icate of training will be issued to those who successfully complete the class. Course Subjects: •RSO Duties and Responsibilities •Radiation Safety Practices •Regulatory Requirements •Dose/Shielding Requirements •Accidents/Storage •Regulatory Guidance (NUREG-1556, Vol. 1) Radiation Safety Officer Course Our Radiation Safety Officer (RSO) training class to qualify participants to serve as facility Radiation Safety Officers. This course satisfies USNRC and US Dept. of Transportation Regulations, and is directed toward the individual responsible for the organization’s radiation safety program. Course partic- ipants will receive a comprehensive training manual, as well as the recent NRC Guidance Document: Program-Specific Guidance About Portable Gauge Licenses (NUREG-1556, Vol. 1). Course Subjects: •Transportation •Risk •ALARA •Radiation Measurement •Operating and Emergency Procedures •Maintenance •Record Keeping Nuclear Gauge Safety Certification Courses Radiation Safety Course and Certification Test Hazmat Refresher Training is required at least once every 3 years (see 49CFR 172.704) This must include function-specific training in the safe transport of portable nuclear gauges. Humboldt courses satisfy this requirement. Hazmat Refresher Training can be taken on either of the Radiation Safety Training or Radiation Safety Officer Training class dates. NOTES We can provide RSO training at any of the currently scheduled Radiation Safety Classes. Contact Humboldt in advance to make necessary arrangements. Call 1.800.537.4183 or go to www.humboldtscientific.com/training.html ONLINE RADIATION SAFETY COURSE and Certification Test Nuclear Density GaugeSOIL FIELD 1.13 www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 Electrical Density Gauge Electrical Density Gauge-Model E H-6500.3F Complies with AASHTO T399 and is an enhancement of ASTM D7698 Humboldt’s Electrical Density Gauge Model E (EDGe) is used for determining the density and moisture content of aggregate, soil aggregate compacted type I or II base, or native soil materials that are suitable for shallow foun- dations, such as secondary roads or base aggregate that is compacted in-place prior to the asphalt or concrete placement at the final grade. The EDGe quality assurance / quality control (QA/QC) system is lightweight, easy to use, and nuclear free. The EDGe system requires both the lab unit and the field unit to complete the testing process, which can be purchased by purchasing the EDGe Starter Unit, H-6500.3F. These two separate units work together in conjunction with the Microsoft app to ensure precise and accurate measurements. The lab unit correlates the Proctor test data of a representative aggregate/soil sample, while the field unit provides corresponding readings of the same material in real-world conditions. Both units are essential—without them, the test cannot be completed. You can purchase additional units to run mul- tiple tests at the same time see below for more info. The lab unit provides you with the tools to take readings directly from either four or six-inch Proctor molds, while performing standard or modified Proc- tor tests. The field unit is lightweight and comes with a ruggedized field case for easy transport and storage. Both units are nuclear free, which elimi- nates the need for radiation safety compliance regimens and transportation restrictions. The EDGe is simple to use. *Rentals available. The Advantages of Using the EDGe Are: •Complies with AASHTO T399 and is an enhancement of ASTM D7698 that includes a laboratory aggregate calibration procedure •Nuclear-free device •Accurate and repeatable results that correlate to either ASTM D1557 or ASTM D698 standard Proctor tests •Does not require highly trained or licensed technicians •Does not require special handling for shipping or regulatory compliance for hazardous materials •Easy-to-learn and easy-to-use with its step-by-step menu •Lightweight and easily transportable •Eliminates licensing and permitting costs associated with nuclear gauges EDGe Gauge App The EDGe App is available free from the Microsoft App Store. This app allows you to operate both the Lab and Field units of the EDGe, as well as provides the field unit with the lab Proctor data. In the field, the app will record dry density, wet density, percent moisture content, relative compaction, date; time, GPS coordinates and generate a location map. This data is routinely used for construction QA/QC certification reporting. The app can generate the reports in a PDF format, which can be saved or shared with others. Window Based Computer/Tablet Required, but not included. EDGe Gauge Software Features: •Download job data •Save and share customized reports in PDF format •Operate both the Lab and Field Unit •Provide the Field Unit with Proctor Data •Time/Date, GPS stamps for each test •Generate a location map Lab Set-Up Tablet not included. Tablet not included.www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 1.14 SOIL FIELD Electrical Density Gauge EDGe Lab Unit - H-6500L.3F The laboratory aggregate calibration procedure involves electrical testing of a representative sample of the construction aggregate or soil materials while performing either an ASTM D1557 Standard Test Method for Lab- oratory Compaction using a Modified Effort of 56,000 ft-lbf/cubic foot or the ASTM D698 Standard Test Method for Laboratory Compaction using a Standard Effort of 12,000 ft-lbf/cubic ft. The EDGe lab unit provides you with the tools to take readings directly from four or six-inch Proctor molds, while performing standard or modified Proctor tests. During the laboratory test, the EDGe lab-sensor and a Windows 11 laptop or tablet are used to collect and manage the physical and electrical data during the Proctor test. The software generates a Proctor curve that dis- plays the maximum dry density at the calculated optimum moisture content and is saved and typically printed for client reports. The empirically derived correlations relate the electrical and physical properties of the aggregate or soil that is scheduled for placement and compaction on construction project sites, such as road construction or other shallow foundation. The physical and electrical data from the Proctor test is saved on the laboratory laptop computer. This data can then be transferred to a ruggedized field Windows 11 tablet by USB stick, a cloud service, or via wireless connection for use with the EDGe field equipment for quality assurance/quality control (QA/QC) testing and construction quality certification. Proctor Curve Proctor Attributes EDGe Field Unit - H-6500F.3F The EDGe Field Unit is a portable, battery-powered instrument capable of being used anywhere without the concerns and regulations associated with nuclear devices. It uses a lightweight, ruggedized field case for easy transport and storage. Just grab the case and you're off to your testing site. During the field quality assurance/quality control testing, the EDGe field-sen- sor and a ruggedized Windows 11 tablet or computer manages the project data. The EDGe field hardware is used along with the EDGe field sensor and a tablet to test the density and moisture of the construction materials. In the field, the EDGe measures the electrical properties of the aggregate and cal- culates physical properties by utilizing the established relationship of the electrical and physical characteristics from the Proctor calibration test of the same aggregate performed in the laboratory. Field tests take a few minutes to perform, and the material properties are displayed in real-time, as well as being saved for reports. The EDGe field reports provide the user and/or cli- ent with quality assurance/quality control data that includes the compacted material dry density, wet density, the percent moisture content, relative com- paction, date, time, GPS coordinates and a location map. The client reports can include additional project information such as the project name and num- ber, the EDGe field sensor’s unique identification number, the EDGe opera- tor’s name, the company name, and other information in the remarks section, such as weather conditions, if needed. Field Site Data Field Site Data Report SOIL FIELD 1.15 www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 Electrical Density Gauge Specifications DescriptionQtyPart # EDGe Field Unit1 H-6500F.3F EDGe Lab Unit1 H-6500L.3F EDGe Starter Unit - H-6500.3F (includes) EDGe Lab Unit - H-6500L.3F (includes) EDGe Field Unit - H-6500F.3F (includes) •4" Proctor Mold— H-4141 •4" Proctor Mold— H-4162 •4" Dart— H-4114.4 •6" Dart— H-4114.6 •8" Dart— H-4114.8 •10" Dart— H-4114.10 •12" Dart— H-4114.12 •4" Proctor Center Dart - H-6500.6 Darts are designed in various lengths to correspond to different lift heights. They can be sold individually. Accessories: DescriptionItem #Qty Soil Sensor, Lab VersionH-6500.500 1 Temperature ProbeH-6500.700 1 Temperature Probe SpikeH-4114.040 1 Proctor Center Dart, 4"H-6500.6 1 Lab Dart AdapterH-6500.550 1 HammerH-4890A 1 Dart Seating ToolH-6500.8 1 HDPE Proctor Mold BaseH-6500.7 1 AC/DC Wall Mount Adapter (Charger) H-6500.02 1 DescriptionItem #Qty Soil Sensor, Field VersionH-6500.100 1 Temperature ProbeH-6500.700 1 Temperature Probe SpikeH-4114.040 1 Field CaseH-6500.800 1 Field Dart TemplateH-6500.200 1 6" Field DartsH-4114.6 4 Field Dart AdapterH-6500.300 1 HammerH-4890A 1 AC/DC Wall Mount Adapter (Charger) H-6500.02 1 Description Sensor RF Output Signal <1 Vpp or 354 mV RMS Maximum Sensor RF Output Power <0.32 mW Frequency Range 10 kHz – 40 MHz Internal Batteries 3x AAA NiMH, Rechargeable Charging Voltage 7.5 V – 9 V DC Charging Current 500 mA Maximum Charging Time 2 hours Charging Indicator Green LED Battery Life Approx. 40 Tests EDGe Sensor Electrical Specifications: Shipping Weight: 22lbs (9.9Kg) Shipping Dims: 24" x 14" x 14" (609 x 355 x 355 mm) Shipping Weight: 11lbs (4.9Kg) Shipping Dims: 16" x 16" x 6" (406 x 406 x 152 mm) Recommended Computers: •Laboratory Use: Any Windows 11 Laptop or Tablet with Blue- tooth ® LE 4.0 or higher (e.g. MS Surface Pro or MS Surface Go) •Field Use: Any Windows 11 Laptop or Tablet with Ruggedized Shell with Bluetooth ® LE 4.0 or higher (recommended: Urban Armor Gear Shell & Screen Shield) •Microsoft compatible pen for laboratory and field use, optional mouse for laboratory use •A keyboard is recommended for laboratory use For Technical Assistance: Web: www.humboldtmfg.com/support Email: support@humboldtmfg.comwww.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 1.16 SOIL FIELD Bearing Capacity, Plate Load Testers Humboldt Plate Bearing Tester ASTM D1195, D1196 The Humboldt Plate Bearing Tester is a field test used for determining the bearing capacity of soil under varying loading conditions. It can also be used to evaluate designs of airport and highway pavements. This Plate Bearing Tester consists of a hydrau- lic jack complete with hand pump and rubber; fast-connect hose, large pressure dial gauge; seat plate; (3) precision dial or digital gauges (1" x 0.0004 (25 x 0.01mm); 18’ (5.5m) deflection beam complete with mounting hardware for gauges, Plate Set (HD-4605) and case for gauges, pump and jack. The Plate Bearing Tester is available in three (3) capacities: 100kN, 200kN and 500kN. All have a digital gauge option available. Individual plate sizes available. Call for more info. Features: •Long piston travel to accommodate setup of reaction loading system •Double-delivery hand pump for fast approach in setup with reaction loading system •High-precision dial gauges •Heavy-duty, rigid measuring bridge Plate Bearing Tester, 100kNHD-4600 Plate Bearing Tester, 200kNHD-4601 Plate Bearing Tester, 500kNHD-4602 Plate Bearing Tester Digital, 100kNHD-4600D Plate Bearing Tester Digital, 200kNHD-4601D Plate Bearing Tester Digital, 500kNHD-4602D Ship wt. 800lbs (362.9kg) Ball Joint Adaptor Ball Joint Adaptor for Corp of Engineers Test CRD-C655. Ball Joint AdaptorHD-4604 Shipping wt. 30 lbs (13.7kg ) Static, Plate Load Tester DIN 18134; BS1377 The Static Plate Load Test can be utilized in earth- works and foundation engineering, as well as road construction in order to determine load set- tlement lines and by this to evaluate the deform ability and the load capacity of the soil. When using the static load tester to evaluate a soil layer, the circular load plate is repeatedly loaded and relieved by means of a load device, a hydraulic pump and pneumatic cylinder. This load is applied to the plate in 6 to 8 equal loading steps. Settlement of the plate is measured by the tester consisting of a carrier frame with a sensing arm and dial gauge. As a counterbalance, a heavy- weight vehicle is used. The indentation of the load plate into the soil, gen- erated with every load step, is indicated via the dial gauge. The settlement of every load step and the corresponding mean normal stress below the load plate appear as test values. Subsequent to the last load step the relief and a second loading similar to the first loading takes place. For the test evaluation these values are shown in a corre- sponding diagram as load settlement lines. The modulus of deformation Ev is determined from the load settlement line of the first load (Ev1) and the second load (Ev2). By comparing the ini- tial deformation from Ev1 and the subsequent deformation of Ev2 provides an indication of the compaction attained. The test results and the load settlement lines can be read with the HD-4139.3F Plate Load tester directly on the display and can be printed out immediately at the site via thermal printer or be reviewed later in the office on a PC. The HD-4139.3F Plate Load Tester Features: •Handy measuring instrument with extra large illuminated display, which is easily viewed in all light conditions and a thermal printer within an aluminum case •Automatic data transfer, Data-Secure, error- free automatic interpretation intuitive menu navigation with a clearly arranged display •Evaluation, displaying and printout immedi- ately at the site shows Ev1, Ev2, Ev1/Ev2 and settlement curve •PC-connection, Software for creation of professional test protocols •USB interface for easy data transfer, GPS for accurate localization of the measuring point-modular design provides flexibility in use Static Plate Load TesterHD-4139.3F Ship wt. 244lbs (17.4kg) Printer Paper Replacement paper for use with Plate Load Tester and LWD. Printer PaperHD-4129.5 Shipping wt. 2 lbs (0.9kg ) HD-4139 3F shown with transport cases, which are included HD-4602 HD-4139.3F HD-4604SOIL FIELD 1.17 www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 Lightweight Deflectometer LIGHTWEIGHTDeflectometer Fast, accurate and easy compaction control! Areas of application: - Quality control in road and railway construction - Quality assurance in earth works and canal construction - Compaction monitoring in pipe trenches and cable ducts - Testing of pavement bedding, foundation backfill HD-4129.3F Lightweight Deflectometers ASTM E2835-11; TP BF-StB B8.3; TB 10102-2004 Lightweight Deflectometers (LWDs) are increas- ingly being used to determine overall compaction quality of all types of earthworks through their use as a QC/QA field test. LWDs provide a rapid deter- mination of elastic modulus, which is an essen- tial factor in mechanistic design and can be used as an accurate assessment of compaction. An LWD is used for measuring the bearing capacity (deflection) of sub-grade/subsoils and unbound base layers, granular layers and backfilling mate- rials, according to ASTM E2835-11. Based on the static plate load test requiring a load vehicle, the LWD provides a simple, fast and repeatable test providing an accurate assessment of compaction parameters. Applications for this non destructive method of testing include bearing capacity and compaction include road construction, pipeline and cable backfill, railway track beds, airport run- way/taxiways, dam construction, embankments, foundations and other earthworks. Humboldt offers two models, a 10kg and a 15kg, in two versions a deluxe and a standard, of Light- weight Deflectometers from HMP— a deluxe models, the HD-4129.3F or HD-4159.3F and a basic models, the HD-4130.3F or HD-4149.3F. Both units are the same mechanism and differ only in the controller used with each one. The HD-4129.3F and the HD-4159.3F feature a deluxe controller that includes: •A large, 3.5" colorful display •Light sensor-controlled back lighting that provides the optimum readability even in bright sunlight •Easy menu navigation • • • • • • •Integrated GPS •Integrated WIFI-enabled •Interface for a thermal printer and USB •Help function •Efficient and fast 32-bit processor The graphic interface of the deluxe controller pro- vides an intuitive menu, which guides the user through the testing procedure and provides real- time test results. Measured data is presented in tabular, as well as curve formats with date, time and GPS location clearly depicted. www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 1.18 SOIL FIELD Lightweight Deflectometer HD-4130.3F This data can be exported from the control unit via USB or wirelessly directly into the Cloud or to your PC for archiving and further processing. This allows personnel in any office to have access to data while you are still on site testing. It is also possible to print out results to a small portable printer on site. Use of the web-based evalua- tion software: HMP report, provides the ability to produce professional reports for each measuring point, which can include your logo and contact details. This software allows you to work with your data from the Cloud or your PC. The software also enables you to store the data in a database with easy-to-use search and editing options. Units Include: The LWD; magnetic base plate; portable printer (USB); GPS; PC Software and Android App (HD-4129.3F and HD-4159.3F only) Units are 120/220V 50/60Hz. Light Weight Deflectometer, 10kg, Deluxe HD-4129.3F Light Weight Deflectometer, 10kg, Standard HD-4130.3F Light Weight Deflectometer, 15kg, Deluxe HD-4159.3F Light Weight Deflectometer, 15kg, Standard HD-4149.3F Ship wt. 127lbs (57.6kg) Transport Cart Cart allows for easy moving of LWD. Transport CartHD-4129.01A Shipping wt. 20 lbs (9kg) Transport Case Wooden case for storage and transport. Transport CaseHD-4129.05A Shipping wt. 40lbs (18kg) Transport Case Heavy-Duty Transport Box for LWD with wheels. Transport CaseHD-4129.05P Shipping wt. 25 lbs (11.5kg) Printer Paper Replacement paper for use with Plate Load Tester and LWD. Printer PaperHD-4129.5 Shipping wt. 2 lbs (0.9kg) HD-4129.05A (case only) Lightweight Deflectometers HD-4129.3F HD-4159.3F HD-4130.3F HD-4149.3F Electronic Settlement Measuring Instrument: Settlement measuring range 0.1 bis 2.0 mm ± 0.02 mm √ √ Measuring range Evd < 225 MN/m2√ √ Temperature range 0 to 40 °C√ √ Very robust, splash-water proof, connection cable with high-quality LEMO connectors √ √ Graphic display 2.2" x 2.87" (56 x 73mm) 2.2" x 2.87" (38 x 68mm) Colorful, light sensor-controlled and illuminated √ Black/white √ Help function√ Fast, efficient 32-bit processor√ WIFI-enabled, USB, thermal printer interface √ √ GPS√ Dimensions210 x 100 x 31mm 211 x 100 x 26mm Storage capacity, internal in measurement series 1000 500 Lightweight Deflectometers HD-4129.3F HD-4159.3F HD-4130.3F HD-4149.3F Power Supply: High-performance rechargeable lithium-polymer-battery 3.7 V, 6300 mAh √ (4) R6 Batteries√ Menu navigation (18 languages available) √√ Loading Mechanism Total weight: 15kg ( HD-4129 & HD-4130) Drop weight: 10kg ( HD-4129 & HD-4130) Total weight: 20kg ( HD-4159 & HD-4149) Drop weight: 15kg ( HD-4159 & HD-4149) Max. impact force 7.07 kN√√ Duration of impact 17.0 ± 1.5 ms√√ Material: zinc coated/ hard-chrome plated steel √√ Spring element 17 disk springs√√ Load Plate Diameter 300 mm, Plate thickness 20.0 mm √√ Total weight 15kg Material: zinc coated steel √√ HD-4129.01A (cart only) HD-4129.05P (case only)SOIL FIELD 1.19 www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 Compaction Uniformity, GeoGauge GeoGauge ASTM D6758 The GeoGauge is a unique, QC/QA field tool that can be used to measure the uniformity of unbound pavement layers by measuring the variability in stiffness throughout a structure. It is an excellent tool for identifying construction anomalies that would otherwise go undetected during construction where only density or per- cent compaction measurements were used. By measuring stiffness, the GeoGauge can reveal and thus help reduce variabilities in layer prop- erties, which density measurements may miss, thus allowing corrective actions to be taken during construction to ensure that the highest quality base and sub-grade are achieved despite varia- tions in materials used. The GeoGauge is the perfect companion instru- ment for density measuring devices such as nuclear gauges and the electrical density gauge. Density measuring devices can be used to ensure that proper compaction is achieved and the GeoGauge can be used to verify that the stiffness/ modulus values assumed in the design specifica- tions of new or rehabilitated pavement structures are met. Compacting and monitoring pavement layers directly to design requirements of structural layer stiffness or material modulus in addition to percent compaction during the construction pro- cess establishes the means to effectively control structural uniformity, strength and deflection, as well as enabling the monitoring and control of the construction quality of various materials. This leads to better smoothness and longer lasting pavement surfaces at lower cost. The GeoGauge works by applying a vibrating force at 25 specific frequencies, which produce small deflections in the material. The resulting displacement is measured by the GeoGauge and displayed as stiffness determined by the ratio of the force to deflection. The GeoGauge produces stress and strain levels common for pavement, bedding and foundation applications. In addition, Young’s and shear modulus can be determined from GeoGauge measurements if a Poisson’s ratio is assumed. This dynamic technology used by the GeoGauge simulates real in-use conditions. This factor allows the GeoGauge to directly measure in-place engineering properties during the con- struction process. The GeoGauge supports and directly links the in-place engineering properties of compacted materials with Mechanistic-Empir- ical Design for effective QC/QA. Successful control of compaction creates a quality functional struc- ture with the desired engineering properties for the application and life intended. Applications include sub-grade, sub-base, base, monitoring the strength gain of lime, cement, fly- ash and polymer stabilized materials, monitoring the re-compaction of underground utility back- fills to previous properties matching surrounding undisturbed materials, monitoring the compac- tion of asphalt and cold in-place recycling to peak properties to prevent wasted effort and damag- ing over-compaction. GeoGaugeH-4140 Shipping wt. 40 lbs (18.1kg) H-4140 with CaseNext >