Hamburg Wet/Dry Wheel Tracker

Hamburg Wet/Dry Wheel Tracker

Product Options

  Part Number & Name Price QTY
Hamburg Wet/Dry Wheel TrackerHA-5300.4F
Hamburg Wet/Dry Wheel Tracker
Add to Cart

Hamburg Wet/Dry Wheel Tracker

Supports the following standards: AASHTO T324, EN 12697-22, Various State standards

Hamburg (Immersion) wheel tracking test is used to evaluate the resistance to rutting and moisture susceptibility of asphalt mixtures. AASHTO-T324 is the generally referred to test standard, although many states modify this procedure to meet their specific requirements. Outside of the U.S. both AASHTO-T234 and EN12697-22 are followed.

What differentiates the Hamburg from other wheel tracking methods is the use of water to condition the temperature of the specimens rather than air. It is believed that the water, in some tests, strips the aggregate which creates a tertiary phase that is distinct from the permanent deformation which occurs in dry wheel tracking tests. The use of stainless steel wheels on a weighted cantilevered arm, in conjunction with water has led some people to refer to Hamburg wheel tracking as a ‘torture test’. Certainly it is the case that less well constructed machines will shake to pieces due to the aggressive nature of the test. The Cox Hamburg is manufactured in California from thick solid stainless steel. Painted steel panels and parts are not an option for the Hamburg test. Our Hamburg is built to last decades not just a couple of years, which is why it comes with a five year warranty. A rigid frame construction is also essential for accurate results. Cheaply produced machines will flex machine and quality of test results go hand in hand. and vibrate with deeper rut depths. Quality The Cox Hamburg will output more precise and accurate results than any other Hamburg machine – guaranteed.


  • Full super rigid stainless steel construction
  • The most rugged, precise and accurate Hamburg wheel tracker available
  • Auto arm lift for fully automated test procedure and user safety
  • True sinusoidal motion
  • Mechanical recirculating water bath for accurate control of the water temperature to better than ±0.5C
  • Two displacement transducers with a resolution of 0.01mm, positioned in line with the wheel to ensure accurate measurement of the rut
  • Continuous rut and rut profile measurement throughout the test
  • Analysis software to automatically pick the inflection point and analyse the output data
  • Air hood option for dry tests
  • Stainless steel and rubber wheels available
  • Built-in timer to start tests automatically
  • AASHTO T324, a variety of DOT methods and  EN12697-22
  • Anytime remote access support
  • Quality build in the USA


  • User friendly, intuitive and reliable Windows® software developed using LabVIEW™
  • Specifically written to meet AASHTO and ASTM standards
  • The user interface can be translated into the user’s preferred language – please inquire
  • Stored test data can be analyzed and compared with other test data utilizing a spreadsheet package
  • Utilities are included for curve fitting of acquired data; testing of system’s inputs and outputs; phase correction and a transducer database for storing calibration factors

Includes full software control of arms individually at outset and completion of test, with stainless steel frame, includes full software package, traceable calibration certificate and desk PC. To perform testing according to AASHTO T324

Wheel Speed:Variable between 15 and 30 cycles (30 - 60 passes) per minute
Wheel Load:158± 1,0lbf (705 ± 4.5kN)
Variable Speed Range:15 - 30 RPM
Slab Thickness:2-4" (50 0 100mm) diff. thickness can be accommodated with spacers
Rut Depth, Transducer Range:2" (50mm)
Temperature Range:Ambient to 158°F (70°C)
Electrical Supply:220/240V 15A, 1Ph
Dimensions:57" x 55" x 50" (1439 x 1380 x 1260mm)
Desktop PC:included


  Part Number & Name Price QTY
Stainless steel mold: 12.6" x 10.2" x 2.4" (320 x 260 x 60mm)
Stainless Steel molds: 12.6" x 10.2" x 4" (320 x 260 x 100mm) deep
Stainless steel molds: 12" x 12" x 2" (305 x 305 x 50mm)
Stainless steel molds - 12.6" x 10 2" x 2.4" (320 x 260 x 60mm) - 2 included with machine
Plastic mold for double cores: 12.6" x 10.2" x 4" (320 x 320 x 260mm) - 2 included
Stainless steel wheel
Rubberized Stainless Steel Wheel
Powered winch and stainless steel mast
Guarding, stainless steel
Chiller assembly
Air Heating hood
Add to Cart


Manuals, Data Sheets & Safety Data Sheets
HA-5300-4F-Hamburg-Wheel-Tracker (Data Sheet PDF)


EN 12697-22
Various State standards

We have updated our
privacy policy.

Click to view

Added to Shopping Cart

Cart Subtotal (1 ):

View Cart Checkout

The following items were already in your cart and have had their quantity increased. If you did not intend for this, we recommend that you edit your shopping cart.

Discover Additional Items