Downloads

Support Numbers:

  • Domestic Sales Support:
    1.800.544.7220, press 1 at prompt
  • International Sales Support:
    1.800.544.7220, press 2 at prompt
  • Technical Support:
    1.800.544.7220, press 1 at prompt
  • Service or Repair:
    1.800.544.7220, press 1 at prompt
  • Electrical Density Gauge Support:
    1.800.544.7220, x6306
  • GeoGauge Support:
    1.800.544.7220, x6306
  • Geotechnical Equipment Support:
    1.800.537.4183
  • Nuclear Gauge Support:
    1.800.537.4183
  • Nuclear Gauge Service:
    1.800.537.4183

EDG Software

Download and reporting software for EDG Guage
Gauge Reporting Software
Version 2016.02.15.311, Released 02.15.2016

Firmware Update for EDG SD Gauge only
EDG Firmware Version: 1.4.3
Released 11.04.2016 (E143R.mfu)

EDG Calibrator Software for H4114.MCU
EDG Calibrator Software
Version 2017.03.13.327, Released 03.13.2017

EDG Product Manual (2014)

NOTE: EDG Model C has been discontinued, if you need information on this product contact us at: 1.800.537.4183

Humboldt Materials Testing Software (HMTS) (Legacy)

Current Version: 3.4.1027 (10/25/2016)

  • Minimum Pentium 4 (32-bit) equivalent (Pentium Dual Core recommended)
  • Minimum 512 MB RAM (1024 MB or more recommended)
  • 300 MB swap space (or more)
  • CD-ROM or DVD Drive
  • Minimum 1024 x 768 display resolution

NOTE: Versions 3.x require Hardware Firmware Version 4.0A or greater. Click here for information for determining firmware version of your unit. Firmware upgrades must be done at Humboldt factory.

HMTS Sample Reports

HM Data Download

Current version: 2017.10.25.77 (10/25/2017)

  • Minimum Pentium 4 (32-bit) equivalent (Pentium Dual Core recommended)
  • Minimum 512 MB RAM (1024 MB or more recommended)
  • 300 MB swap space (or more)
  • CD-ROM or DVD Drive
  • Minimum 1024 x 768 display resolution

NOTE: Versions 3.x require Hardware Firmware Version 4.0A or greater. Click here for information for determining firmware version of your unit. Firmware upgrades must be done at Humboldt factory.

HM Data Download

Gauge Assistant

Version 4.3.43.2 (EXE) – (12/15/2014)
(UNINSTALL any previous versions)
Note: Gauge Assistant is protected with a hard key,
Contact Humboldt for licensing information.
Email
Phone: 1-800-537-4183

SD Model Software

Download and reporting software for model SD
nuclear gauges
Gauge Reporting Software
Version 2016.02.15.311 Released 02/15/2016

Firmware Update for SD Gauge with NiMH battery pack only
SD Firmware 1.5.0
Released 08/25/2017 (N150RL.mfu)

Firmware Update for SD Gauge with LiON pack only
SD Firmware 1.4.6
Released 11/04/2016 (N146RL.mfu)

Email
Phone: 1-800-537-4183

Programmer Utilities

EP1132

X-PRO
Logical Devices

Husky Programmer
Logical Devices

Humboldt IR Download

Note: For use with Humboldt Nuclear Gauges and
GeoGauge. Not for used with model SD gauges.
Last Updated: 10/25/2007
Version 2.6.3 – (MSI)

Utilities

MDAC Version 2.5 – 7.5 MB

HASP Drivers – 1.5 MB (32 bit)
HASP Drivers – 1.75 MB (16 bit)

Catalog Cover

FREE

11th Edition Catalog

FREE CATALOG!