These economical, large-capacity, bench ovens are designed to handle a wide variety of applications, which require a maximum temperature of 400°F (204°C) with a ±0.5% control accuracy and ±8°F (4°C) uniformity for efficient drying of large samples.
All models feature an analog thermocouple-actuated, temperature controller and a 1/3 HP motor with a 400 CFM blower. Ovens have 2" (51mm) 6 lb/cf industrial rockwool insulation and the built-in baffle helps prevent radiant heat and optimizes oven heating operation. All ovens have 304 stainless steel interiors, explosion venting latches and incoloy sheathed tubular heating elements.
All ovens feature a UL-listed control panel and meet the requirements of National Fire Prevention Association Standard 86, Industrial Risk Insurers, Factory Mutual and OSHA standards. Motor starter and heating element contactors are electrically interlocked to shut off heaters if power to the blower is interrupted, and, permits operation of the blower without heat for cooling.
Ovens include two (2) 50lb (22.7kg) capacity nickel-plated wired shelves, which can be placed on any of the 10 support channels, which are located on 3" centers. Extra shelves can be ordered to accommodate needs.
Alll Dimensions are W x D x H
The clamp is designed to hold three pendulums
Used with associated glassware to demonstrate the electrolytic decomposition of solutions
Designed to accept up to four funnels
Lever Knife-Edge Clamp
In operation, the clamp is used as a knife-edge fulcrum for supporting the meter stick in the inverted position.