ASTM D6927
Marshall Stability and Flow of Bituminous Mixtures
Qty. | Model | Description |
---|---|---|
1 | Choose One: | |
H-30131 | Lab Oven, Forced Air Model; 450°F (232°C) 2.86 cu. ft. (81L) capacity. Hydraulic temperature controller, ±1° sensitivity. 115V, 60 Hz, 1600 watts min, Inside: 18" x 14" x 19.6" (457 x 356 x 498mm) Overall: 20" x 16" x 33.5" (508 x 406 x 851mm) | |
H-30131.4F | Lab Oven, Forced Air Model; 450°F (232°C) 2.86 cu. ft. (81L) capacity. Hydraulic temperature controller, ±1° sensitivity. 230V, 50/60 Hz, 1600 watts min,Inside: 18" x 14" x 19.6" (457 x 356 x 498mm) Overall: 20" x 16" x 33.5" (508 x 406 x 851mm) | |
1 | H-1342 | Marshall Breaking Head, 4" |
1 | Choose One: | |
HM-5030.3F | Load Frame, Master Loader, Elite Series, 11000 lbf (50kN) | |
HM-5170A.3F | Marshall and CBR/LBR Automatic Load Frame | |
HM-5125A.3F | Load Frame, Balanced Mix, Automated | |
1 | Choose One: | |
H-1390 | Water Bath, Deluxe 120V 60Hz | |
H-1390.4F | Water Bath, Deluxe 220V 50/60Hz | |
1 | Choose One: | |
H-4952 | Heavy duty Hotplate, 12 x 12" (30 x 30cm), 120V 60Hz, 1600 watts, 38° to 371° C (100° to 700°F) | |
H-4952.4F | Heavy Duty Hotplate, 12 x 12" (30 x 30cm), 230V 50/60Hz, 1600 watts, 38° to 371° C (100° to 700°F) | |
1 | Choose One: | |
HT-4052 | Thermometer, Long-Stem, Digital: Accuracy of ±2.0°F / ±1.0°C. | |
HT-4052U | Thermometer, Long-Stem, Digital: Accuracy of ± .2°C. | |
1 | Choose One: | |
HT-4510 | Thermometer, Single Probe, Pt100 Platinum | |
HT-4511 | Thermometer, Dual Probe, Pt100 Platinum | |
H-2600.20FT | Saybolt Viscosity, 134 to 148°F, Subdiv. 0.2°F, Length 10.875" (275mm), Immersion Total, PTFE-coated | |
H-2600.20F | Saybolt Viscosity, 134 to 148°F, Subdiv. 0.2°F, Length 10.875" (275mm), Immersion Total | |
H-2610.20C | Saybolt Viscosity, 57 to 65°C, Subdiv. 0.1°C, Length 10.875" (275mm), Immersion Total | |
H-2610.20CT | Saybolt Viscosity, 57 to 65°C, Subdiv. 0.1°C, Length 10.875" (275mm), Immersion Total, PTFE-coated |
Note: Also required but not part of basic sets—Thermometers and in case of cutback binder and air bath.
Load Frames are sold as Load Frames only, additional items required for testing include: Load Cell, Strain Transducer and HMTS Marshall Module Software.